LED2472G:24-Channels LED driver with LED error detection and gain control

The LED2472G is a monolithic, low voltage, low current power 24-bit shift register designed for LED panel displays with particular features oriented to indoor and outdoor LED screen billboards. The LED2472G guarantees 20 V of output driving capability, allowing several LEDs to be connected in series. The device is configured in 3 groups (red, green and blue) of 8 independently-controlled channels. The LED current can be separately regulated for each color within the range from 4 mA to 72 mA. This range is divided into two sub-ranges and the current can be adjusted within each range in 64 steps of resolution (6 bits per color). A single external resistor is required. All the controls and the shift register data are accessible via serial interface. A single 24-bit configuration register is used to choose features and settings to fit the application. The LED failure detection circuit checks 3 different conditions that can occur at the output line: short to GND, short to LED power supply rail or open channel. The auto power shutdown and auto power-on feature (selectable) allows the device to save power without any external intervention. Thermal management includes overtemperature flag and the output thermal shutdown (170 °C). The high clock frequency of up to 30 MHz makes the device suitable for high data rate transmission. A selectable gradual output delay reduces the inrush current. The supply voltage ranges from 3 V and 5.5 V.

Key Features

  • 24 constant current output channels
  • Output current: from 4 mA to 72 mA
  • 8 x 3 independently controlled channels (RGB)
  • Current programmable through external resistor
  • 7-bit global current gain adjustment in two ranges
  • Error detection mode (both open and shorted LED)
  • Programmable shorted LED detection thresholds
  • Auto power-saving / auto wakeup
  • Gradual output delay (selectable)
  • Supply voltage: 3 V to 5.5 V
  • Thermal shutdown and thermal flag
  • Up to 30 MHz CLK 4 wires interface
  • 20 V current generators rated voltage
Product Specifications
DescriptionVersionSize
DS9652: 24-channels LED driver with error detection and gain control3.01 MB
Brochures
DescriptionVersionSize
Brochure Power management guide05.20164 MB
Solution Evaluation Tools
Part NumberManufacturerDescription
STEVAL-ILL015V2HB LED driver with diagnostics based on the LED2472G and STM32
STEVAL-ILL015V3STHB LED driver with diagnostic based on the LED2472G
Sample & Buy
Part NumberQuantityUnit Price (US$) *PackagePacking TypeOperating Temperature (°C) (min)Operating Temperature (°C) (max)ECCN (EU)ECCN (US)Country of Origin
LED2472GQTR10000.943VFQFPN 40 5x5x1.0Tape And Reel--NECEAR99CHINA
LED2472GBTR10001.001TQFP 48 7x7x1.0Tape And Reel--NECEAR99MALAYSIA
Quality & Reliability
Part NumberPackageGradeRoHS Compliance GradeMaterial Declaration**
LED2472GQTRVFQFPN 40 5x5x1.0IndustrialEcopack2
LED2472GBTRTQFP 48 7x7x1.0IndustrialEcopack2
24-channels LED driver with error detection and gain control LED2472G
Very low drop voltage regulators with inhibit KFXX