STAP08DP05:Low voltage 8-bit constant current LED sink driver with output error detection for automotive applications

The STAP08DP05 is a monolithic, low voltage, low current power 8-bit shift register designed for LED panel displays. The STAP08DP05 contains an 8-bit serial-in, parallel-out shift register that feeds an 8-bit D-type storage register. In the output stage, eight regulated current sources are designed to provide 5-100 mA constant current to drive the LEDs.

The detection circuit checks 3 different conditions that can occur on the output line: short to GND, short to VOor open line. The data detection results are loaded in the shift register and shifted out via the serial line output.

STAP08DP05 detection functionality is implemented without increasing the pin number. Through a secondary function of the output enable and latch pin (DM1 and DM2 respectively), a dedicated logic sequence allows the device to enter or leave detection mode. Through an external resistor, users can adjust the output current of the STAP08DP05, thus controlling the light intensity of the LEDs. In addition, the user can adjust the intensity of the brightness of the LEDs from 0% to 100% through the OE/DM2pin.

The STAP08DP05 guarantees a 20 V output driving capability, allowing users to connect more LEDs in series. The high clock frequency, 30 MHz, also satisfies the system requirement of high volume data transmission. The 3.3 V of voltage supply is very useful for applications that interface any microcontroller from 3.3 V. Compared with a standard TSSOP package, the TSSOP exposed pad increases the capability of heat dissipation by a factor of 2.5.

Key Features

  • Low voltage power supply down to 3 V
  • 8 constant current output channels
  • Adjustable output current through external resistor
  • Short and open output error detection
  • Serial data IN/parallel data OUT
  • Able to drive 3.3 V microcontroller
  • Output current: 5-100 mA
  • 30 MHz clock frequency
  • Available in high thermal efficiency TSSOP exposed pad
  • ESD protection 2.5 kV HBM
Product Specifications
DescriptionVersionSize
DS9500: Low voltage 8-bit constant current LED sink driver with output error detection for automotive applications6.0698 KB
Flyers
DescriptionVersionSize
LED array drivers for automotive applications1.01 MB
LED drivers for automotive applications1.0707 KB
Brochures
DescriptionVersionSize
Brochure Power management guide05.20164 MB
Solution Evaluation Tools
Part NumberManufacturerDescription
STEVAL-ILL058V1STHigh brightness LED array driver with diagnostics for automotive applications based on STAP08DP05 and STM8AF
Sample & Buy
Part NumberQuantityUnit Price (US$) *PackagePacking TypeOperating Temperature (°C) (min)Operating Temperature (°C) (max)ECCN (EU)ECCN (US)Country of Origin
STAP08DP5XTTR10000.418HTSSOP16Tape And Reel-40125NECEAR99PHILIPPINES
Quality & Reliability
Part NumberPackageGradeRoHS Compliance GradeMaterial Declaration**
STAP08DP5XTTRHTSSOP16AutomotiveEcopack2md_i-wspc-0-wspc-htssop-wspc-16-wspc-4-wspc-.-wspc-4-wspc-pitch-wspc-0-wspc-.-wspc-65-wspc-expad_abi0-wspc-up04aba.pdf
md_i-wspc-0-wspc-htssop-wspc-16-wspc-4-wspc-.xml
Low voltage 8-bit constant current LED sink driver with output error detection for automotive applications STAP08DP05
The LED1642GW and ALED1642GW start-up guide ALED1642GW
The LED1642GW and ALED1642GW start-up guide ALED1642GW
Very low drop voltage regulators with inhibit KFXX
md_i-wspc-0-wspc-htssop-wspc-16-wspc-4-wspc-.-wspc-4-wspc-pitch-wspc-0-wspc-.-wspc-65-wspc-expad_abi0-wspc-up04aba.pdf STAP08DP05
md_i-wspc-0-wspc-htssop-wspc-16-wspc-4-wspc-.xml STAP08DP05