STEVAL-IFP010V3:High-side driver based on the VNI2140J

The STEVAL-IFP010V3 demonstration board is based on the VNI2140J, a monolithic device designed using ST’s VIPower technology for driving two independent resistive or inductive loads with one side connected to ground. Active current limitation prevents a drop in system power supply if the load is shorted. A built-in thermal shutdown protects the chip from overtemperature and short-circuit conditions. During an overload condition, the channel turns off and back on automatically in order to maintain the junction temperature between TTSD and TR. If this condition causes the case temperature to reach TCSD, the overloaded channel is turned off and will restart only when the case temperature has decreased down to TCR.

If more than one channel is in overload, the TCSD restart will not be simultaneous in order to prevent high peak current from the supply. Non-overloaded channels continue to operate normally. The open-drain diagnostic outputs indicate overtemperature conditions and open load in the off-state.

Key Features

  • Output current: 1 A per channel
  • Shorted-load protection
  • Junction overtemperature protection
  • Case overtemperature protection for thermal independence of the channels
  • Non-simultaneous TCSD (thermal case shutdown) restart for the various channels
  • Protection against loss of ground
  • Current limitation
  • Undervoltage shutdown
  • Open load in off-state and short to VCC detection
  • Open-drain diagnostic outputs
  • 3.3 V CMOS/TTL compatible inputs
  • Fast demagnetization of inductive loads
  • Conforms to IEC 61131-2 supply voltage: +4 V to +36 V
  • RoHS compliant
Product Specifications
DescriptionVersionSize
DB1515: High-side driver based on the VN12140J1.1163 KB
Application Notes
DescriptionVersionSize
AN2985: STEVAL-IFP010V3: designing with VNI2140J dual high-side smart power solid-state relay IC2.11 MB
Board Manufacturing Specifications
DescriptionVersionSize
STEVAL-IFP010V3 gerber files1.0120 KB
Bill of Materials
DescriptionVersionSize
STEVAL-IFP010V3 BOM1.17 KB
Schematic Packs
DescriptionVersionSize
STEVAL-IFP010V3 schematics1.035 KB
Brochures
DescriptionVersionSize
Products and Solutions for Factory Automation and Control1.03 MB
License Agreement
DescriptionVersionSize
Evaluation products license agreement1.0125 KB
Sample & Buy
Part NumberCore ProductUnit Price (US$) *QuantityECCN (EU)ECCN (US)Country of Origin
STEVAL-IFP010V3VNI2140J60.031NECEAR99ITALY
Quality & Reliability
Part NumberPackageGradeRoHS Compliance GradeMaterial Declaration**
STEVAL-IFP010V3CARDIndustrialEcopack2
High-side driver based on the VN12140J STEVAL-IFP010V3
STEVAL-IFP010V3: designing with VNI2140J dual high-side smart power solid-state relay IC STEVAL-IFP010V3
STEVAL-IFP010V3: designing with VNI2140J dual high-side smart power solid-state relay IC STEVAL-IFP010V3
STEVAL-IFP010V3: designing with VNI2140J dual high-side smart power solid-state relay IC STEVAL-IFP010V3
STEVAL-IFP010V3: designing with VNI2140J dual high-side smart power solid-state relay IC STEVAL-IFP010V3
STEVAL-SPIMD20V1 demonstration kit based on the SPIMD20 integrated motor drive STEVAL-SPIMD20V1
ST-LINK/V2 in-circuit debugger/programmer for STM8 and STM32 ST-LINK-V2