STEVAL-ISA044V6:3 A synchronous 900 kHz step-down DC-DC converter with inhibit function based on the ST1S10 (DFN)

The STEVAL-ISA044V6 demonstration board is based on the ST1S10 device assembled in a DFN package. The ST1S10 is a step-down DC-DC converter with the inhibit function optimized for powering high voltages in LCD applications and low voltages in digital-core HDD applications. It replaces the high-current linear solution when high power dissipation is an issue.

It provides up to 3 A over an input voltage range of 2.5 V to 18.0 V, and synchronous rectification removes the need for an external Schottky diode. A high internal switching frequency (900 kHz) allows for the use of tiny surface-mount components, as well as a resistor divider to set the output voltage value. Only an inductor and 3 capacitors are required.

The current-mode PWM architecture and stable operation with low-ESR SMD ceramic capacitors result in low output ripple. To maximize power conversion efficiency in light load, the regulator can work in burst mode automatically. The device can operate in PWM mode with a fixed frequency or synchronized to an external frequency. It switches at a frequency of 900 kHz when the SYNC pin is connected to ground or a fixed voltage (less than 5.5 V), and can synchronize the switching frequency between 400 kHz to 1.2 MHz from an external clock applied to the SYNC pin.

A thermal shutdown circuit is integrated and activates at 150 °C. Cycle-by-cycle current limitation provides protection against shorted outputs. The quiescent current is less than 6 μA in the inhibit state.

Key Features

  • Input voltage range: 2.5 V to 18.0 V
  • Max IOUT : 3 A
  • High internal switching frequency: 900 kHz
  • PWM mode operation with a fixed frequency or synchronized to an external frequency between 400 kHz and 1.2 MHz
  • Inhibit pin available
  • Quiescent current: < 6 μA in inhibit state
  • RoHS compliant
Product Specifications
DescriptionVersionSize
DB1469: 3 A synchronous 900 kHz step-down DC-DC converter with inhibit function based on the ST1S10 (DFN)1.1306 KB
Board Manufacturing Specifications
DescriptionVersionSize
Gerber files for STEVAL-ISA044V61.0109 KB
Bill of Materials
DescriptionVersionSize
STEVAL-ISA044V6 BOM2.17 KB
Schematic Packs
DescriptionVersionSize
STEVAL-ISA044V6 schematics2.237 KB
License Agreement
DescriptionVersionSize
Evaluation products license agreement1.0125 KB
Sample & Buy
Part NumberCore ProductUnit Price (US$) *QuantityECCN (EU)ECCN (US)Country of Origin
STEVAL-ISA044V6ST1S1036.751NECEAR99ITALY
Quality & Reliability
Part NumberPackageGradeRoHS Compliance GradeMaterial Declaration**
STEVAL-ISA044V6CARDIndustrialEcopack2
3 A synchronous 900 kHz step-down DC-DC converter with inhibit function based on the ST1S10 (DFN) STEVAL-ISA044V6
3 A synchronous 900 kHz step-down DC-DC converter with inhibit function based on the ST1S10 (DFN) STEVAL-ISA044V6
3 A synchronous 900 kHz step-down DC-DC converter with inhibit function based on the ST1S10 (DFN) STEVAL-ISA044V6
3 A synchronous 900 kHz step-down DC-DC converter with inhibit function based on the ST1S10 (DFN) STEVAL-ISA044V6
ST-LINK/V2 in-circuit debugger/programmer for STM8 and STM32 ST-LINK-V2