• 简体中文
• English

TS4621E：High-performance class G stereo headphone amplifier with I2C volume control

The TS4621E is a class-G stereo headphone driver dedicated to high audio performance, high power efficiency and space-constrained applications.

It is based on the core technology of a low power dissipation amplifier combined with a high-efficiency buck converter for supplying this amplifier.

When powered by a battery, the buck converter generates the appropriate voltage to the amplifier depending on the amplitude of the audio signal to supply the headsets. It achieves a total 2.1 mA current consumption at 100 μW output power (10 dB crest factor).

THD+N is 0.02% maximum at 1 kHz and PSRR is 100 dB at 217 Hz, which ensures a high audio quality of the device in a wide range of environments.

The traditionally bulky output coupling capacitors can be removed.

A dedicated common-mode sense pin removes parasitic ground noise.

The TS4621E is designed to be used with an output serial resistor. It ensures unconditional stability over a wide range of capacitive loads.

The TS4621E is packaged in a tiny 16-bump flip-chip package with a pitch of 400 μm.

Key Features

• Power supply range: 2.3 V to 4.8 V
• 0.6 mA/channel quiescent current
• 2.1 mA current consumption with 100 μW/channel (10 dB crest factor)
• 0.006% typical THD+N at 1 kHz
• 100 dB typical PSRR at 217 Hz
• 100 dB of SNR A-weighted at G = 0 dB
• Zero pop and click
• I2 C interface for volume control
• Digital volume control range from -60 dB to +4 dB
• Independent right and left channel shutdown control
• Integrated high-efficiency buck converter
• Low software standby current: 5 μA max
• Output-coupling capacitors removed
• Thermal shutdown and short-circuit protection
• Flip-chip package: 1.65 mm x 1.65 mm, 400 μm pitch, 16 bumps

Product Specifications

Brochures

Product Evaluation Tools

Sample & Buy

Quality & Reliability