• 简体中文
• English

LT1212 - 14MHz, 7V/µs, Single Supply Dual and Quad Precision Op Amps

Most H (Metal Can), J (Ceramic), and K (Metal Can) Packages from Linear Technology Are Now Obsolete

Download complete datasheet for Details

The LT®1211 is a dual, single supply precision op amp with a 14MHz gain-bandwidth product and a 7V/µs slew rate. The LT1212 is a quad version of the same amplifier. The DC precision of the LT1211/LT1212 eliminates trims in most systems while providing high frequency performance not usually found in single supply amplifiers.

The LT1211/LT1212 will operate on any supply greater than 2.5V and less than 36V total. These amplifiers are specified on single 3.3V, single 5V and ±15V supplies, and only require 1.3mA of quiescent supply current per amplifier. The inputs can be driven beyond the supplies without damage or phase reversal of the output. The minimum output drive is 20mA, ideal for driving low impedance loads. Note:For applications requiring higher slew rate, see the LT1213/LT1214 and LT1215/LT1216 data sheets.

特点 Slew Rate 7V/µs Typ Gain-Bandwidth Product: 14MHz Typ Fast Settling to 0.01%2V Step to 200µV 900ns Typ10V Step to 1mV 2.2µs Typ Excellent DC Precision in All PackagesInput Offset Voltage 275µV MaxInput Offset Voltage Drift 6µV/°Input Offset Current: 30nA MaxInput Bias Current: 125nA MaxOpen-Loop Gain: 1200V/mV Min Single Supply OperationInput Voltage Range Includes GroundOutput Swings to Ground While Sinking Current Low Input Noise Voltage: 12nV/rt Hz Typ Low Input Noise Current: 0.2pA/rt Hz Typ Specified on 3.3V, 5V and ±15V Large Output Drive Current: 20mA Min Low Supply Current per Amplifier: 1.8mA Max Dual in 8-Pin DIP and SO8 Quad in 14-Pin DIP and NARROW SO16 Note: For applications requiring higher slew rate, see the LT1213/LT1214 and LT1215/LT1216 data sheets. 典型应用

应用 2.5V Full-Scale 12-Bit Systems: VOS 10V Full-Scale 16-Bit Systems: VOS Active Filters Photo Diode Amplifiers DAC Current-to-Voltage Amplifiers Battery-Powered Systems 封装信息