The LTC3541-2 combines a synchronous buck DC/ DC converter with a very low dropout linear regulator (VLDO regulator) and internal feedback resistor networks to provide two output voltages from a single input voltage with minimal external components. When configured for dual output operation, the LTC3541-2’s auto start-up feature will bring the 1.875V buck output into regulation in a controlled manner, prior to enabling the 1.5V VLDO output without the need for external pin control. The 1.5V VLDO/linear regulator output prior to 1.875V buck output sequencing may also be obtained via external pin control. The input voltage range is ideally suited for Li-Ion battery applications powering sub-3.3V logic from 5V or 3.3V rails.
The synchronous buck converter provides a high effi ciency output, typically 90%. It can provide up to 500mA of output current while switching at 2.25MHz, allowing the use of small surface mount inductors and capacitors. A mode select pin allows Burst Mode operation to be enabled for higher effi ciency at light load currents, or disabled for lower noise, constant frequency operation.
The VLDO regulator provides a low noise, low voltage output capable of providing up to 300mA of output current using only a 2.2μF ceramic capacitor. The input supply voltage of the VLDO regulator (LVIN) may come from the buck regulator output or a separate supply
产品特点 Features
|
应用
典型应用图参数 |
器件型号 | 封装 | 引脚 | 温度 | 价格 (以 1 ~ 99 片为批量) | 价格 (以 1000 片为批量) * |
LTC3541EDD#PBF | DFN | 10 | E | $2.70 | $1.89 |
LTC3541EDD#TRPBF | DFN | 10 | E | $1.95 | |
LTC3541EDD-1#PBF | DFN | 10 | E | $2.70 | $1.89 |
LTC3541EDD-1#TRPBF | DFN | 10 | E | $1.95 | |
LTC3541EDD-2#PBF | DFN | 10 | E | $2.70 | $1.89 |
LTC3541EDD-2#TRPBF | DFN | 10 | E | $1.95 | |
LTC3541EDD-3#PBF | DFN | 10 | E | $2.70 | $1.89 |
LTC3541EDD-3#TRPBF | DFN | 10 | E | $1.95 |