• 简体中文
• English

MAX1082A, MAX1082B：300ksps/400ksps、单电源、4通道、串行10位ADC，内置电压基准

The MAX1082/MAX1083 10-bit analog-to-digital converters (ADCs) combine a 4-channel analog-input multiplexer, high-bandwidth track/hold (T/H), and serial interface with high conversion speed and low power consumption. The MAX1082 operates from a single +4.5V to +5.5V supply; the MAX1083 operates from a single +2.7V to +3.6V supply. Both devices' analog inputs are software configurable for unipolar/bipolar and single-ended/pseudo-differential operation. The 4-wire serial interface connects directly to SPI/QSPI™ and MICROWIRE® devices without external logic. A serial strobe output allows direct connection to TMS320-family digital signal processors. The MAX1082/ MAX1083 use an external serial-interface clock to perform successive-approximation analog-to-digital conversions. The devices feature an internal +2.5V reference and a reference-buffer amplifier with a ±1.5% voltage-adjustment range. An external reference with a 1V to VDD range may also be used. The MAX1082/MAX1083 provide a hard-wired active-low SHDN pin and four software-selectable power modes (normal operation, reduced power (REDP), fast power-down (FASTPD), and full power-down (FULLPD)). These devices can be programmed to shut down automatically at the end of a conversion or to operate with reduced power. When using the power-down modes, accessing the serial interface automatically powers up the devices, and the quick turn-on time allows them to be shut down between all conversions. The MAX1082/MAX1083 are available in 16-pin TSSOP packages.

关键特性 4-Channel Single-Ended or 2-Channel Pseudo-Differential Inputs Internal Multiplexer and Track/Hold Single-Supply Operation +4.5V to +5.5V (MAX1082) +2.7V to +3.6V (MAX1083) Internal +2.5V Reference 400kHz Sampling Rate (MAX1082) Low Power: 2.5mA (400ksps) 1.3mA (REDP) 0.9mA (FASTPD) 2µA (FULLPD) SPI/QSPI/MICROWIRE/TMS320-Compatible 4-Wire Serial Interface Software-Configurable Unipolar or Bipolar Inputs 16-Pin TSSOP Package

MAX1082、MAX1082A、MAX1082B、MAX1083、MAX1083A、MAX1083B：典型工作电路 应用 电池供电应用 数据采集 医疗仪器 笔输入量化器 便携式数据记录 过程控制

数据手册DataSheet

关键参数

相关产品

• MAX11619：10位、300ksps ADC，带有FIFO和内部基准
• MAX1046：10位、多通道ADC/DAC，带有FIFO、温度传感器和GPIO端口
• MAX1284：400ksps/300ksps、单电源、低功耗、串行12位ADC，内置电压基准
• MAX1283：300ksps/400ksps、单电源、4通道、串行12位ADC，内置电压基准
• MAX1282：300ksps/400ksps、单电源、4通道、串行12位ADC，内置电压基准

订购型号