• 简体中文
• English

MAX2411A：低成本、RF上/下变频器，带有LNA及PA驱动器

The MAX2411A performs the RF front-end transmit/receive function in time-division-duplex (TDD) communication systems. It operates over a wide frequency range and is optimized for RF frequencies around 1.9GHz. Applications include most popular cordless and PCS standards. The MAX2411A includes a low-noise amplifier (LNA), a downconverter mixer, a local-oscillator buffer, an upconverter mixer, and a variable-gain power-amplifier (PA) driver in a low-cost, plastic surface-mount package. The MAX2411A's unique bidirectional, differential IF port reduces cost and component count by allowing the transmit and receive paths to share the same IF filter. The LNA has a 2.4dB typical noise figure and a -10dBm input third-order intercept point (IP3). The downconverter mixer has a low 9.2dB noise figure and 4dBm input IP3. Image and local-oscillator filtering are implemented off-chip for maximum flexibility. The PA driver amplifier has 15dB of gain, which can be reduced over a 35dB range. Power consumption is only 60mW in receive mode and 90mW in transmit mode and drops to less than 3µW in shutdown mode. For applications requiring separate, single-ended IF input and output ports, refer to the MAX2410 data sheet. For applications requiring only a receive function, Maxim offers a low-cost downconverter with LNA (see the MAX2406 data sheet).

关键特性 Low-Cost Silicon Bipolar Design Integrated Upconvert/Downconvert Function Operates from a Single +2.7V to +5.5V Supply 3.2dB Combined Receiver Noise Figure: 2.4dB (LNA) 9.2dB(mixer) Flexible Power-Amplifier Driver: 18dBm Output Third-Order Intercept (OIP3) 35dB Gain-Control Range LO Buffer for Low LO Drive Level Low Power Consumption: 60mW Receive 90mW Full-Power Transmit 0.3µW Shutdown Mode Flexible Power-Down Modes Compatible with MAX2510/MAX2511 IF Transceivers

MAX2411A：典型工作电路 应用 DCS 1800或PCS 1900单模电话 DECT 铱星手机 ISM波段收发器 PHS/PACS PWT1900

数据手册DataSheet

关键参数

订购型号