• 简体中文
• English

MAX2511：低电压IF收发器，带有限幅放大器和接收信号强度指示

The MAX2511 is a complete, highly integrated IF transceiver for applications employing a dual-conversion architecture. Alternatively, the MAX2511 can be used as a single-conversion transceiver if the RF operating frequency ranges from 200MHz to 440MHz. In a typical application, the receiver downconverts a high IF/RF (200MHz to 440MHz) to a 10.7MHz low IF using an image-reject mixer. Functions include an image-reject downconverter with 34dB of image suppression followed by an IF buffer that can drive an off-chip IF filter; an on-chip limiting amplifier offering 90dB of monotonic received-signal-strength indication (RSSI); and a robust limiter output driver. The transmit image-reject mixer generates a clean output spectrum to minimize filter requirements. It is followed by a 40dB variable-gain amplifier that maintains IM3 levels below -35dBc. Maximum output power is 2dBm. A VCO and oscillator buffer for driving an external prescaler are also included. The MAX2511 operates from a 2.7V to 5.5V supply and includes flexible power-management control. Supply current is reduced to 0.1µA in shutdown mode. For applications using in-phase (I) and quadrature (Q) baseband architecture for the transmitter, Maxim offers a corresponding transceiver product: the MAX2510. The MAX2510 has features similar to those of the MAX2511, but upconverts I/Q baseband signals using a quadrature upconverter.

关键特性 Single +2.7V to +5.5V Supply Complete Receive Path: 200MHz to 440MHz (first IF) to 8MHz to 13MHz (second IF) Limiter with Differential Outputs (adjustable level) RSSI Function with 90dB Monotonic Dynamic Range Complete Transmit Path: 8MHz to 13MHz (second IF) to 200MHz to 440MHz (first IF) On-Chip Oscillator with Voltage Regulator and Buffer Advanced System Power Management (four modes) 0.1µA Shutdown Supply Current

MAX2511：典型工作电路 应用 400MHz ISM收发器 中频收发器 PACS、PHS、DECT及其它PCS无线手机及基站 PWT1900无线手机及基站 无线数据链接

数据手册DataSheet

关键参数

开发工具

• MAX2511EVKIT

技术资料

• RF Basics

订购型号