• 简体中文
• English

MAX2645：3.4GHz至3.8GHz、SiGe低噪声放大器/PA前置驱动器

The MAX2645 is a versatile, high-linearity, low-noise amplifier designed for 3.4GHz to 3.8GHz wireless local loop (WLL), wireless broadband access, and digital microwave radio applications. The device features an externally adjustable bias control, set with a single resistor, that allows the user to meet minimum linearity requirements while minimizing current consumption. The amplifier's high-gain, low-noise performance and adjustable input third-order intercept (IP3) allow it to be used as a low-noise amplifier (LNA) in the receive path, a PA predriver in the transmit path, or as an LO buffer. The MAX2645 features a logic-level gain control that provides a 25dB step reduction in gain, which improves IP3 performance for operation during high input signal level conditions. Supply current is reduced from 9mA in high-gain mode to 3mA in low-gain mode. The device also includes a logic-controlled shutdown mode, which reduces supply current to 0.1µA. The MAX2645 operates from a +3V to +5.5V supply and is offered in the miniature 10-pin µMAX® package (5mm x 3mm) with an exposed paddle. Its performance has been optimized for use with the MAX2683/MAX2684 3.5GHz SiGe mixers to provide a complete high-performance, front-end solution for 3.5GHz applications.

关键特性 3.4GHz to 3.8GHz Frequency Range LNA Performance (High/Low-Gain Modes) Gain: +14.4dB/-9.7dB NF: 2.3dB/15.5dB Input IP3: +4dBm/+13dBm Supply Current: 9.2mA/2.7mA Highly Versatile Application Receive Path 1st and 2nd Stage LNA Transmit PA Predriver LO Buffer Adjustable IP3 and Supply Current 0.1µA Supply Current in Shutdown Mode +3.0V to +5.5V Single-Supply Operation 10-Pin µMAX-EP Package (5.0mm x 3.0mm)

MAX2645：典型工作电路 应用 数字微波无线装置 无线宽带接入 无线本地环路(WLL)

数据手册DataSheet

关键参数

开发工具

• MAX2645EVKIT

技术资料

• CMOS Source Resistance and Its Effects on Source-Follower Gain

订购型号