MAX3238E:+3.0V至+5.5V、10nA、250kbps RS-232收发器,带有±15kV ESD保护、输入/输出和逻辑引脚

The MAX3238E/MAX3248E transceivers use Maxim's revolutionary AutoShutdown Plus™ feature to achieve 10nA supply current. These devices shut down the on-board power supply and drivers when they do not sense a valid signal transition on either the receiver or transmitter inputs. This occurs if the RS-232 cable is disconnected or if the transmitters of the connected peripheral are turned off. The devices turn on again when a valid transition is applied to any RS-232 receiver or transmitter input. AutoShutdown Plus automatically achieves this power savings through its on-board circuitry, as no changes are required to the existing BIOS or operating system. All RS-232 inputs and outputs, as well as the logic I/O pins, have enhanced ESD protection to ±15kV. The additional ESD protection on the logic I/O pins makes the MAX3238E/MAX3248E ideal for cell phone data cable applications because it eliminates the need for costly external TransZorb™ or protection schemes. The MAX3238E/MAX3248E contain five drivers and three receivers and are 3V-powered EIA/TIA-232 and V.28/V.24 communication interfaces intended for cell phones, data cables, and modem applications. A proprietary, high-efficiency, dual charge-pump power supply and a low-dropout transmitter combine to deliver true RS-232 performance from a single +3.0V to +5.5V supply. A guaranteed data rate of 250kbps provides compatibility with popular software for communicating with personal computers. The MAX3238E and the MAX3248E differ only in their input logic thresholds. The MAX3238E has standard logic thresholds, while the MAX3248E has low-level logic thresholds of 0.6V to 1.2V, which are ideal for 1.8V systems. The transmitter inputs, FORCEON, and active-low FORCEOFF have a 400 kilohms active positive feedback resistor. Once driven to a valid logic level, they will retain this level if the driving signal is removed or goes high impedance. Unused transmitter and logic inputs may be left unconnected. The MAX3238E/MAX3248E can operate with supply voltages ranging from +3.0V to +5.5V.

关键特性
  • Enhanced ESD Protection on RS-232 I/O Pins and All Logic Pins
    • ±15kV—Human Body Model
    • ±8kV—IEC 1000-4-2 Contact Discharge
    • ±15kV—IEC 1000-4-2 Air-Gap Discharge
  • Guaranteed Data Rate: 250kbps
  • 10nA Low-Power Shutdown with Receivers Active
  • Schmitt Triggers on All Inputs
  • Flow-Through Pinout
  • Meets EIA/TIA-232 Specifications Down to 3.0V
  • Guaranteed 6V/µs Slew Rate
  • Low-Level Logic Thresholds (MAX3248E)
  • RS-232-Compatible Outputs to 2.7V
MAX3238E、MAX3248E:典型工作电路
MAX3238E、MAX3248E:典型工作电路
应用
  • 电池供电应用
  • 蜂窝数据电缆
  • 数据托架
  • 调制解调器
  • 外设
  • 打印机
数据手册DataSheet
语言下载文件备注
英文MAX3238E-MAX3248E.pdfRev 1; 07/2001
关键参数
Part NumberVSUPPLY
(V)
TxRxData Rate
(kbps)
ICC
(mA)
Internal Charge PumpExt. CapsCap. Value
(µF)
ESD Protect.
(±kV)
Rx Active in ShutdnPackage/PinsBudgetary
Price
mintypnomSee Notes
MAX3238E
  • 3.3
  • 5
532500.5Yes40.1150SSOP/28$2.25 @1k
MAX3248ESSOP/28-
技术资料
质量和环境数据
订购型号
型号状况推荐替代产品封装温度RoHS/无铅
MAX3238ECAI停止供货MAX3238ECAI+SSOP,;28引脚;81.6mm²0°C至+70°C参考数据资料
MAX3238ECAI+生产中SSOP,;28引脚;81.6mm²0°C至+70°CRoHS/无铅:无铅
MAX3238ECAI+T生产中SSOP,;28引脚;81.6mm²0°C至+70°CRoHS/无铅:无铅
MAX3238ECAI-T停止供货MAX3238ECAI+TSSOP;28引脚0°C至+70°C参考数据资料
MAX3238EEAI停止供货MAX3238EEAI+SSOP,;28引脚;81.6mm²-40°C至+85°C参考数据资料
MAX3238EEAI+生产中SSOP,;28引脚;81.6mm²-40°C至+85°CRoHS/无铅:无铅
MAX3238EEAI+T生产中SSOP,;28引脚;81.6mm²-40°C至+85°CRoHS/无铅:无铅
MAX3238EEAI-T停止供货MAX3238EEAI+TSSOP,;28引脚;81.6mm²-40°C至+85°C参考数据资料
MAX3238E-MAX3248E.pdf MAX3248E
Determining Clock Accuracy Requirements for UART Communications MAX3206E
RS-232 Features Explained MAX3381E
Selecting and using RS-232 Interface Parts for Your Power Supply Voltages MAX3387E
Design Considerations for Data-Lump Cables MAX3387E
MAX3238E.pdf MAX3238E
MAX3238E-MAX3248E.pdf MAX3248E