MAX492：单/双/四路、微功耗、单电源、满摆幅运算放大器

The dual MAX492, quad MAX494, and single MAX495 operational amplifiers combine excellent DC accuracy with rail-to-rail operation at the input and output. Since the common-mode voltage extends from VCC to VEE, the devices can operate from either a single supply (+2.7V to +6V) or split supplies (±1.35V to ±3V). Each op amp requires less than 150µA supply current. Even with this low current, the op amps are capable of driving a 1kΩ load, and the input referred voltage noise is only 25nV/√Hz. In addition, these op amps can drive loads in excess of 1nF. The precision performance of the MAX492/MAX494/MAX495, combined with their wide input and output dynamic range, low-voltage single-supply operation, and very low supply current, makes them an ideal choice for battery-operated equipment and other low-voltage applications. The MAX492/MAX494/MAX495 are available in DIP and SO packages in the industry-standard op-amp pin configurations. The MAX495 is also available in the smallest 8-pin SO: the µMAX® package.

关键特性

Low-Voltage Single-Supply Operation (+2.7V to +6V)
Rail-to-Rail Input Common-Mode Voltage Range
Rail-to-Rail Output Swing
500kHz Gain-Bandwidth Product
Unity-Gain Stable
150µA Max Quiescent Current per Op Amp
No Phase Reversal for Overdriven Inputs
200µV Offset Voltage
High Voltage Gain (108dB)
High CMRR (90dB) and PSRR (110dB)
Drives 1kΩ Load
Drives Large Capacitive Loads
MAX495 Available in µMAX Package-8-Pin SO
Dual, precision, rail-to-rail input and output (MAX492)
Quad, precision, rail-to-rail input and output (MAX494)
Single, precision, rail-to-rail input and output (MAX495)

MAX492、MAX495：引脚配置

应用

电池供电应用
数据采集
低电压应用
便携式设备
信号调理

数据手册DataSheet

语言	下载文件	备注
英文	MAX492-MAX495.pdf	Rev 2; 09/1996

关键参数

Part Number	Amps.	Rail to Rail	V_SUPPLY (Total) (V)	V_SUPPLY (Total) (V)	I_CC per Amp. (µA)	V_OS (µV)	CMRR @DC (dB)	PSRR @DC (dB)	Input I_BIAS (nA)	Unity Gain BW (MHz)	Slew Rate (V/µs)	e_n (nV/√Hz)	Package/Pins	Budgetary Price
Part Number	Amps.	Rail to Rail	min	max	typ	max	typ	typ	max	typ	typ	<	Package/Pins	See Notes
MAX492	2	Input/Output	2.7	6	150	500	90	110	60	0.5	0.2	25	CDIP(N)/8 PDIP(N)/8 SOIC(N)/8	$4.17 @1k
MAX494	4	Input/Output	2.7	6	150	500	90	110	60	0.5	0.2	25	CDIP(N)/14 PDIP(N)/14 SOIC(N)/14	$4.52 @1k

技术资料

Rail-to-Rail Outputs and Beyond-the-Rails Inputs: The Inside Story on Micropower Op Amps

质量和环境数据

MAX492.pdf

订购型号

型号	状况	推荐替代产品	封装	温度	RoHS/无铅
MAX492C/D	NRND		DICE SALES,；NA引脚；DICE S；	0°C至+70°C	参考数据资料
MAX492CPA	停止供货	MAX492CPA+	PDIP(N),；8引脚；79.7mm²	0°C至+70°C	RoHS/无铅：否
MAX492CPA+	生产中		PDIP(N),；8引脚；79.7mm²	0°C至+70°C	RoHS/无铅：无铅
MAX492CSA	停止供货	MAX492CSA+	SOIC(N),；8引脚；30.9mm²	0°C至+70°C	RoHS/无铅：否
MAX492CSA+	生产中		SOIC(N),；8引脚；30.9mm²	0°C至+70°C	RoHS/无铅：无铅
MAX492CSA+T	生产中		SOIC(N),；8引脚；30.9mm²	0°C至+70°C	RoHS/无铅：无铅
MAX492CSA-T	停止供货	MAX492CSA+T	N.SO；8引脚	0°C至+70°C	参考数据资料
MAX492EPA	停止供货	MAX492EPA+	PDIP(N),；8引脚；79.7mm²	-40°C至+85°C	RoHS/无铅：否
MAX492EPA+	生产中		PDIP(N),；8引脚；79.7mm²	-40°C至+85°C	RoHS/无铅：无铅
MAX492ESA	停止供货	MAX492ESA+	SOIC(N),；8引脚；30.9mm²	-40°C至+85°C	RoHS/无铅：否
型号	状况	推荐替代产品	封装：类型引脚占位面积封装图编码/变更 *	温度	RoHS/无铅？
MAX492ESA+	生产中		SOIC(N),；8引脚；30.9mm²	-40°C至+85°C	RoHS/无铅：无铅
MAX492ESA+T	生产中		SOIC(N),；8引脚；30.9mm²	-40°C至+85°C	RoHS/无铅：无铅
MAX492ESA-T	停止供货	MAX492ESA+T	SOIC(N),；8引脚；30.9mm²	-40°C至+85°C	RoHS/无铅：否
MAX492MJA	停止供货		CDIP(N),；8引脚；82.6mm²	-55°C至+125°C	RoHS/无铅：否