• 简体中文
• English

MAX503：5V、低功耗、并行输入、电压输出、10位DAC

单通道、并行、电压输出DAC，采用SSOP封装

The MAX503 is a low-power, 10-bit, voltage-output digital-to-analog converter (DAC) that uses single 5V or dual ±5V supplies. This device has an internal voltage reference plus an output buffer amplifier. Operating current is only 250µA from a single 5V supply, making it ideal for portable and battery-powered applications. In addition, the shrink small-outline package (SSOP) measures only 0.1 square inches, using less board area than an 8-pin DIP. 10-bit resolution is achieved through laser trimming of the DAC, op amp, and reference. No further adjustments are necessary. Internal gain-setting resistors can be used to define a DAC output voltage range of 0V to +2.048V, 0V to +4.096V, or ±2.048V. Four-quadrant multiplication is possible without the use of external resistors or op amps. The parallel logic inputs are double buffered and are compatible with 4-bit, 8-bit, and 16-bit microprocessors. For a hardware and software compatible 12-bit upgrade, refer to the MAX530 data sheet. For DACs with similar features but with a serial data interface, refer to the MAX504/MAX515 data sheet.

关键特性 Buffered Voltage Output Internal 2.048V Voltage Reference Operates from Single 5V or Dual ±5V Supplies Low Power Consumption: 250µA Operating Current 40µA Shutdown-Mode Current SSOP Package Saves Space Relative Accuracy: ±1/2LSB Max Over Temperature Guaranteed Monotonic Over Temperature 4-Quadrant Multiplication with No External Components Power-On Reset Double-Buffered Parallel Logic Inputs

MAX503：功能原理框图 应用 任意函数发生器 自动测试设备(ATE) 电池供电数据转换产品 数字增益与失调控制 工业过程控制 微处理器控制校准 元件数最少的模拟系统

数据手册DataSheet

关键参数

相关产品

• MAX530：+5V、低功耗、并行输入、电压输出、12位DAC

订购型号