• 简体中文
• English

MAX513：低成本、3通道、8位、电压输出DAC，串行接口

三通道、串行、电压输出DAC，SO封装

The MAX512/MAX513 contain three 8-bit, voltage-output digital-to-analog converters (DAC A, DAC B, and DAC C). Output buffer amplifiers for DACs A and B provide voltage outputs while reducing external component count. The output buffer for DAC A can source or sink 5mA to within 0.5V of VDD or VSS. The buffer for DAC B can source or sink 0.5mA to within 0.5V of VDD or VSS. DAC C is unbuffered, providing a third voltage output with increased accuracy. The MAX512 operates with a single +5V ±10% supply, and the MAX513 operates with a +2.7V to +3.6V supply. Both devices can also operate with split supplies. The 3-wire serial interface has a maximum operating frequency of 5MHz and is compatible with SPI™, QSPI™, and Microwire™. The serial input shift register is 16 bits long and consists of 8 bits of DAC input data and 8 bits for DAC selection and shutdown. DAC registers can be loaded independently or in parallel at the positive edge of CS. A latched logic output is also available for auxiliary control. Ultra-low power consumption and small packages (14-pin DIP/SO) make the MAX512/MAX513 ideal for portable and battery-powered applications. Supply current is only 1mA, dropping to less than 1µA in shutdown. Any of the three DACs can be independently shut down. In shutdown mode, the DAC's R-2R ladder network is disconnected from the reference input, minimizing system power consumption.

关键特性 Operate from a Single +5V (MAX512) or +3V (MAX513) Supply, or from Bipolar Supplies Low Power Consumption 1mA Operating Current <1µA Shutdown Current Unipolar or Bipolar Outputs 5MHz, 3-Wire Serial Interface SPI, QSPI, and Microwire Compatible Two Buffered, Bipolar-Output DACs (DACs A/B) Independently Programmable Shutdown Mode Space-Saving 14-Pin SO/DIP Packages Pin and Software Reset

MAX512、MAX513：功能框图 应用 数字增益与失调控制 可编程衰减器 可编程电流源 可编程电压源 射频数字调节偏置电路 VCO调谐

数据手册DataSheet

关键参数

质量和环境数据

• MAX513.pdf

相关产品

• MAX522：双路、8位、电压输出、串行DAC，8引脚SO封装

订购型号