• 简体中文
• English

MAX5183：双路、10位、40MHz、电流/电压输出、同时刷新DAC

The MAX5180 contains two 10-bit, simultaneous-update, current-output digital-to-analog converters (DACs) designed for superior performance in communications systems requiring analog signal reconstruction with low distortion and low-power operation. The MAX5183 provides equal specifications, with on-chip precision resistors for voltage output operation. The devices are designed for 10pV-s glitch operation to minimize unwanted spurious signal components at the output. An on-board 1.2V bandgap circuit provides a well-regulated, low-noise reference that can be disabled for external reference operation. The MAX5180/MAX5183 are designed to provide a high level of signal integrity for the least amount of power dissipation. The DACs operate from a single supply of 2.7V to 3.3V. Additionally, these DACs have three modes of operation: normal, low-power standby, and complete shutdown, which provides the lowest possible power dissipation with 1µA (max) shutdown current. A fast wake-up time (0.5µs) from standby mode to full DAC operation conserves power by activating the DACs only when required. The MAX5180/MAX5183 are packaged in a 28-pin QSOP and are specified for the extended (-40°C to +85°C) temperature range. For lower-resolution, dual 8-bit versions, refer to the MAX5186/MAX5189 data sheet.

关键特性 2.7V to 3.3V Single-Supply Operation Wide Spurious-Free Dynamic Range: 70dB at fOUT = 2.2MHz Fully Differential Outputs for Each DAC ±0.5% FSR Gain Mismatch ±0.2° Phase Mismatch Low-Current Standby or Full-Shutdown Modes Internal 1.2V Low-Noise Bandgap Reference Small 28-Pin QSOP Package

MAX5180、MAX5183：功能框图 应用 任意波形发生器(AWG) 数字信号处理(DSP) 成像 I、Q发射信号重建 信号牌

数据手册DataSheet

关键参数

开发工具

• MAX5183EVKIT

技术资料

• Differential Gain and Phase—Why Measure It, if You Cannot See It?
• REP039: The MAX2510 IF Transceiver with the MAX5183 DAC

相关产品

• MAX5186：双路、8位、40MHz、电流/电压、同时输出DAC
• MAX5189：双路、8位、40MHz、电流/电压、同时输出DAC

订购型号