• 简体中文
• English

MAX522：双路、8位、电压输出、串行DAC，8引脚SO封装

双路、串行、电压输出DAC

The MAX522 contains two 8-bit, buffered, voltage-output digital-to-analog converters (DAC A and DAC B) in small 8-pin SO and DIP packages. DAC A's buffer can source and sink 5mA, and DAC B's output can source and sink 500µA, both to within 0.5V of ground and VDD. The MAX522 operates with a single +2.7V to +5.5V supply. The device utilizes a 3-wire serial interface, which operates at clock rates up to 5MHz and is compatible with SPI™, QSPI™, and Microwire™ interface standards. The serial input shift register is 16 bits long and consists of eight bits of DAC input data and eight bits for DAC selection and shutdown control. DAC registers can be loaded independently or in parallel at the positive edge of active-low CS. The MAX522's ultra-low power consumption and small 8-pin SO package make it ideal for portable and battery-powered applications. Supply current is less than 1mA and drops below 1µA in shutdown mode. In addition, the reference input is disconnected from the REF pin during shutdown, further reducing the system's total power consumption. The software format is compatible with the MAX512/MAX513 triple 8-bit DACs.

关键特性 Operates from a Single +2.7V to +5.5V Supply Dual Buffered Voltage Output Low Power Consumption: 1mA Operating Current < 1µA Shutdown Current Independently Programmable Shutdown Mode 5MHz, 3-Wire Serial Interface SPI, QSPI, and Microwire Compatible Space-Saving 8-Pin SO Package

MAX522：功能框图 应用 数字增益与失调控制 功率放大器偏置控制 可编程电流源 可编程电压源 VCO调谐

数据手册DataSheet

关键参数

质量和环境数据

• MAX522.pdf

相关产品

• MAX548A：+2.5V至+5.5V、低功耗、单/双路、8位、电压输出DAC，µMAX封装

订购型号