• 简体中文
• English

MAX533：2.7V、低功耗、8位四路DAC，带有满摆幅输出缓冲器

尺寸最小的四通道、8位DAC

The MAX533 serial-input, voltage-output, 8-bit quad digital-to-analog converter (DAC) operates from a sin-gle +2.7V to +3.6V supply. Internal precision buffers swing rail to rail, and the reference input range includes both ground and the positive rail. The MAX533 features a 1µA shutdown mode. The serial interface is double buffered: a 12-bit input shift register is followed by four 8-bit buffer registers and four 8-bit DAC registers. The 12-bit serial word consists of eight data bits and four control bits (for DAC selection and special programming commands). Both the input and DAC registers can be updated indepen-dently or simultaneously with a single software com-mand. Two additional asynchronous control pins, active-low LDAC and active-low CLR, provide simultaneous updating or clearing of the input and DAC registers. The interface is compatible with SPI™, QSPI™ (CPOL = CPHA = 0 or CPOL = CPHA = 1), and Microwire™. A buffered data output allows daisy chaining of serial devices. In addition to 16-pin DIP and CERDIP packages, the MAX533 is available in a 16-pin QSOP that occupies the same area as an 8-pin SO.

关键特性 +2.7V to +3.6V Single-Supply Operation Ultra-Low Supply Current: 0.7mA while Operating 1µA in Shutdown Mode Ultra-Small 16-Pin QSOP Package Ground to VDD Reference Input Range Output Buffer Amplifiers Swing Rail to Rail 10MHz Serial Interface, Compatible with SPI, QSPI (CPOL = CPHA = 0 or CPOL = CPHA = 1), and Microwire Double-Buffered Registers for Synchronous Updating Serial Data Output for Daisy Chaining Power-On Reset Clears Serial Interface and Sets All Registers to Zero Software Shutdown Software-Programmable Logic Output Asynchronous Hardware Clear Resets All Internal Registers to Zero

MAX533：功能框图 应用 数字增益与失调控制 便携式仪表 可编程衰减器 可编程电流源

数据手册DataSheet

关键参数

相关产品

• MAX534：+5V、低功耗、8位四路DAC，带有满摆幅输出缓冲器

订购型号