• 简体中文
• English

MAX543：串行、CMOS、12位乘法DAC，8引脚封装

单通道、串行、电流输出DAC，采用SO封装

The MAX543 is a 12-bit, current-output, multiplying digital-to-analog converter (DAC) that comes in space-saving 8-pin DIP and 8- or 16-pin surface-mount SO packages. Its 3-wire serial interface saves additional board space and also results in low power dissipation. When used with microprocessors (µPs) with a serial port, the MAX543 minimizes the digital noise feedthrough from its input pins to its output. The serial port can be used as a dedicated analog bus and kept inactive while the MAX543 is in use. Serial interfacing also reduces the complexity of opto- or transformer-isolated applications. The MAX543 contains a 12-bit R-2R type DAC, a serial-in parallel-out shift register, a DAC register and control logic. On the rising edge of the clock (CLK) pulse, the serial input (SRI) data is shifted into the MAX543. When all the data is clocked in, it is transferred into the DAC register by taking the active-low LOAD input low. The MAX 543 is specified with a single power supply of either +5V or +15V. With a +5V supply, the digital inputs are TTL and +5V CMOS compatible. High-voltage CMOS compatibility is maintained with a +15V supply. Maxim’s MAX543 uses low-tempco thin-film resistors laser trimmed to ±¼ LSB linearity and better than ±1 LSB gain accuracy. The digital inputs are protected against electrostatic discharge (ESD) damage and can typically withstand over 5,000V of ESD voltages

关键特性 12-Bit Accuracy in 8-Pin MiniDIP or SO Fast 3-Wire Serial Interface Low INL and DNL (±1/2 LSB Max) Gain Accuracy to ±1LSB Max Low Gain Tempco (5ppm/°C Max) Operates with +5V or +15V Supplies TTL/CMOS Compatible ESD Protected

MAX543：功能框图 应用 µP控制系统 自动校准 数控滤波器 运动控制系统 可编程放大器/衰减器

数据手册DataSheet

关键参数

技术资料

• Damage from a Lightning Bolt or a Spark—It Depends on How Tall You Are!
• How Signal Chains and PLCs Impact Our Lives

相关产品

• MAX551：+3V/+5V、12位、串行、乘法DAC，10引脚µMAX封装

订购型号