• 简体中文
• English

MAX6314：68HC11/双向微处理器复位电路

业内唯一的Motorola 68HCxx/双向兼容、SOT复位IC

The MAX6314 low-power CMOS microprocessor (µP) supervisory circuit is designed to monitor power supplies in µP and digital systems. The MAX6314's active-low RESET output is bidirectional, allowing it to be directly connected to µPs with bidirectional reset inputs, such as the 68HC11. It provides excellent circuit reliability and low cost by eliminating external components and adjustments. The MAX6314 also provides a debounced manual reset input. This device performs a single function: it asserts a reset signal whenever the VCC supply voltage falls below a preset threshold or whenever manual reset is asserted. Reset remains asserted for an internally programmed interval (reset timeout period) after VCC has risen above the reset threshold or manual reset is deasserted. The MAX6314 comes with factory-trimmed reset threshold voltages in 100mV increments from 2.5V to 5V. Preset timeout periods of 1ms, 20ms, 140ms, and 1120ms (minimum) are also available. The device comes in a SOT143 package. For a µP supervisor with an open-drain reset pin, see the MAX6315 data sheet.

关键特性 Small SOT143 Package Active-Low RESET Output Simplifies Interface to Bidirectional Reset I/Os Precision Factory-Set VCC Reset Thresholds: 100mV Increments from 2.5V to 5V ±1.8% Reset Threshold Accuracy at TA = +25°C ±2.5% Reset Threshold Accuracy over temp. Four Reset Timeout Periods Available: 1ms, 20ms, 140ms, or 1120ms (minimum) Immune to Short VCC Transients 5µA Supply Current Pin-Compatible with MAX811

MAX6314：典型工作电路 应用 计算机：台式机、工作站和服务器 控制器 精确的µP与µC电源监控 智能仪表 便携式电池供电设备

数据手册DataSheet

关键参数

技术资料

• Choosing Supervisor Outputs

质量和环境数据

• MAX6314.pdf

相关产品

• MAX6318：5引脚微处理器监控电路，带有看门狗定时及手动复位
• MAX6319：5引脚微处理器监控电路，带有看门狗定时及手动复位
• MAX6317：5引脚微处理器监控电路，带有看门狗定时及手动复位
• MAX6320：5引脚微处理器监控电路，带有看门狗定时及手动复位
• MAX6316：5引脚微处理器监控电路，带有看门狗定时及手动复位
• MAX6321：5引脚微处理器监控电路，带有看门狗定时及手动复位
• MAX6322：5引脚微处理器监控电路，带有看门狗定时及手动复位

订购型号