MAX6405:微处理器监控电路,4焊球(2 x 2)芯片级封装

低功耗微处理器监控电路,采用4焊球晶片级封装

The MAX6400–MAX6405 is a family of ultra-low power microprocessor (µP) supervisory circuits used for monitoring battery, power-supply, and regulated system voltages. Each device contains a precision bandgap reference comparator and is trimmed to specified trip threshold voltages. These devices provide excellent circuit reliability and low cost by eliminating external components and adjustments when monitoring system voltages from 2.5V to 5.0V. A manual reset input is also included. The MAX6400–MAX6405 assert a reset signal whenever the VCC supply voltage falls below a preset threshold. These devices are differentiated by their output logic configurations and preset threshold voltages. The MAX6400/MAX6403 (push-pull) and the MAX6402/MAX6405 (open-drain) have an active-low reset (active-low RESET is logic low when VCC is below VTH). The MAX6401/MAX6404 have an active-high push-pull output (RESET is logic high when VCC is below VTH). All parts are guaranteed to be in the correct output logic state for VCC down to 1V. The reset circuits designed to ignore fast transients on VCC. The MAX6400/MAX6401/MAX6402 have voltage thresholds between 2.20V and 3.08V in approximately 100mV increments. The MAX6403/MAX6404/MAX6405 have voltage thresholds between 3.30V and 4.63V in approximately 100mV increments. Ultra-low supply current of 500nA (MAX6400/MAX6401/MAX6402) makes these parts ideal for use in portable equipment. These devices are available in 4-bump chip-scale packages (UCSP™)

关键特性
  • Ultra-Small 4-Bump (2 x 2) UCSP (See UCSP Reliability Section for More Details).
  • 70% Smaller Than SC70 Package
  • Ultra-Low 500nA (typ) Supply Current (MAX6400/MAX6401/MAX6402)
  • Factory-Trimmed Reset Thresholds from 2.20V to 4.63V in Approximately 100mV Increments
  • ±2.5% Threshold Accuracy -40°C to +85°C
  • Factory-Set 100ms (min) Reset Timeout Period
  • Manual Reset Input
  • Guaranteed Reset Valid to VCC = 1.0V
  • Three Reset Output Logic Options: Active-Low Push-Pull, Active-High Push-Pull, and Active-Low Open-Drain.
  • Immune to Short VCC Transients
  • No External Components
MAX6400、MAX6401、MAX6402、MAX6403、MAX6404、MAX6405:µP接口,带双向复位
MAX6400、MAX6401、MAX6402、MAX6403、MAX6404、MAX6405:µP接口,带双向复位
应用
  • 蜂窝电话
  • MP3播放器
  • 寻呼机
  • PDA
  • 便携式电池供电设备
数据手册DataSheet
语言下载文件备注
英文MAX6400-MAX6405.pdfRev 1; 08/2001
关键参数
Part NumberReset Thresh.
(V)
Reset OuttRESETWatchdog FeatureSupervisor FeaturesICC
(µA)
Package/PinsBudgetary
Price
minmaxSee Notes
MAX6400
  • 1.8 to 2.5
  • 2.5 to 3.3
  • Active Low
  • Push-Pull
85ms to 300msNo WatchdogManual Reset1UCSP/4$1.80 @1k
MAX6401
  • 1.8 to 2.5
  • 2.5 to 3.3
  • Active High
  • Push-Pull
UCSP/4$1.07 @1k
MAX6402
  • 1.8 to 2.5
  • 2.5 to 3.3
  • Active Low
  • Open Drain
UCSP/4$1.16 @1k
MAX64053.3 to 5.5
  • Active Low
  • Open Drain
UCSP/4-
相关产品
  • MAX6378:3引脚、超低功耗、SC70/SOT23封装电压检测器
  • MAX6379:3引脚、超低功耗、SC70/SOT23封装电压检测器
  • MAX6376:3引脚、超低功耗、SC70/SOT23封装电压检测器
  • MAX6380:3引脚、超低功耗、SC70/SOT23封装电压检测器
  • MAX6377:3引脚、超低功耗、SC70/SOT23封装电压检测器
  • MAX6375:3引脚、超低功耗、SC70/SOT23封装电压检测器
  • MAX811:4引脚微处理器电压监测器,带有手动复位输入
  • MAX812:4引脚微处理器电压监测器,带有手动复位输入
  • MAX6346:3引脚、SC70/SOT封装、超低功耗的微处理器复位电路
  • MAX6327:3引脚、SC70/SOT封装、超低功耗的微处理器复位电路
  • MAX6328:3引脚、SC70/SOT封装、超低功耗的微处理器复位电路
  • MAX6326:3引脚、SC70/SOT封装、超低功耗的微处理器复位电路
  • MAX6347:3引脚、SC70/SOT封装、超低功耗的微处理器复位电路
  • MAX6348:3引脚、SC70/SOT封装、超低功耗的微处理器复位电路
订购型号
型号状况推荐替代产品封装温度RoHS/无铅
MAX6405BS33+T生产中UCSP,;4引脚;1.3mm²0°C至+70°CRoHS/无铅:无铅
MAX6405BS33-T停止供货UCSP,;4引脚;1.3mm²0°C至+70°CRoHS/无铅:否
MAX6405BS34+T生产中UCSP,;4引脚;1.3mm²0°C至+70°CRoHS/无铅:无铅
MAX6405BS34-T停止供货UCSP,;4引脚;1.3mm²0°C至+70°CRoHS/无铅:否
MAX6405BS35+T生产中UCSP,;4引脚;1.3mm²0°C至+70°CRoHS/无铅:无铅
MAX6405BS35-T停止供货UCSP,;4引脚;1.3mm²0°C至+70°CRoHS/无铅:否
MAX6405BS36+T生产中UCSP,;4引脚;1.3mm²0°C至+70°CRoHS/无铅:无铅
MAX6405BS36-T停止供货MAX6405BS36+TUCSP,;4引脚;1.3mm²0°C至+70°CRoHS/无铅:否
MAX6405BS37+T生产中UCSP,;4引脚;1.3mm²0°C至+70°CRoHS/无铅:无铅
MAX6405BS37-T停止供货UCSP,;4引脚;1.3mm²0°C至+70°CRoHS/无铅:否
型号状况推荐替代产品封装:类型 引脚 占位面积封装图 编码/变更 *温度RoHS/无铅?
MAX6405BS38+T生产中UCSP,;4引脚;1.3mm²0°C至+70°CRoHS/无铅:无铅
MAX6405BS38-T停止供货UCSP,;4引脚;1.3mm²0°C至+70°CRoHS/无铅:否
MAX6405BS39+T生产中UCSP,;4引脚;1.3mm²0°C至+70°CRoHS/无铅:无铅
MAX6405BS39-T停止供货UCSP,;4引脚;1.3mm²0°C至+70°CRoHS/无铅:否
MAX6405BS40+T生产中UCSP,;4引脚;1.3mm²0°C至+70°CRoHS/无铅:无铅
MAX6405BS40-T停止供货UCSP,;4引脚;1.3mm²0°C至+70°CRoHS/无铅:否
MAX6405BS41+T生产中UCSP,;4引脚;1.3mm²0°C至+70°CRoHS/无铅:无铅
MAX6405BS41-T停止供货UCSP,;4引脚;1.3mm²0°C至+70°CRoHS/无铅:否
MAX6405BS42+T生产中UCSP,;4引脚;1.3mm²0°C至+70°CRoHS/无铅:无铅
MAX6405BS42-T停止供货UCSP,;4引脚;1.3mm²0°C至+70°CRoHS/无铅:否
型号状况推荐替代产品封装:类型 引脚 占位面积封装图 编码/变更 *温度RoHS/无铅?
MAX6405BS43+T生产中UCSP,;4引脚;1.3mm²0°C至+70°CRoHS/无铅:无铅
MAX6405BS43-T停止供货UCSP,;4引脚;1.3mm²0°C至+70°CRoHS/无铅:否
MAX6405BS44+T生产中UCSP,;4引脚;1.3mm²0°C至+70°CRoHS/无铅:无铅
MAX6405BS44-T停止供货UCSP,;4引脚;1.3mm²0°C至+70°CRoHS/无铅:否
MAX6405BS45+T生产中UCSP,;4引脚;1.3mm²0°C至+70°CRoHS/无铅:无铅
MAX6405BS45-T停止供货UCSP,;4引脚;1.3mm²0°C至+70°CRoHS/无铅:否
MAX6405BS46+T生产中UCSP,;4引脚;1.3mm²0°C至+70°CRoHS/无铅:无铅
MAX6405BS46-T停止供货UCSP,;4引脚;1.3mm²0°C至+70°CRoHS/无铅:否
MAX6400-MAX6405.pdf MAX6405
µP接口,带双向复位 MAX6405