• 简体中文
• English

MAX706S：监视+3V电压、低成本、微处理器监控电路

The MAX706P/R/S/T, MAX706AP/AR/AS/AT, and MAX708R/S/T microprocessor (µP) supervisory circuits reduce the complexity and number of components required to monitor +3V power-supply levels in +3V to +5V µP systems. These devices significantly improve system reliability and accuracy compared to separate ICs or discrete components. The MAX706P/R/S/T and MAX706AP/AR/AS/AT supervisory circuits provide the following four functions: 1) A reset output during power-up, power-down, and brownout conditions. 2) An independent watchdog output that goes low if the watchdog input has not been toggled within 1.6s. 3) A 1.25V threshold detector for power-fail warning, low-battery detection, or for monitoring a power supply other than the main supply. 4) An active-low, manual-reset input. The only difference between the MAX706R/AR, MAX706S/AS, and MAX706T/AT is the reset-threshold voltage levels, which are 2.63V, 2.93V, and 3.08V, respectively. All have active-low reset output signals. The MAX706P/AP are identical to the MAX706R/AR, except the reset output signal is active-high. The watchdog timer function for the MAX706AP/AR/AS/AT disables when the WDI input is left open or connected to a high-impedance state of a low-leakage tri-state output. The MAX708R/S/T provide the same functions as the MAX706R/S/T and MAX706AR/AS/AT except they do not have a watchdog timer. Instead, they provide both active-low RESET and RESET outputs. As with the MAX706, devices with R, S, and T suffixes have reset thresholds of 2.63V, 2.93V, and 3.08V, respectively. These devices are available in 8-pin SO, DIP, and µMAX® packages and are fully specified over the operating temperature range.

关键特性 µMAX Package, Small 8-Pin SO Precision Supply-Voltage Monitors 2.63V (MAX706P/R, MAX706AP/AR, and MAX708R) 2.93V (MAX706S, MAX706AS, and MAX708S) 3.08V (MAX706T, MAX706AT, and MAX708T) 200ms Reset Time Delay Debounced TTL/CMOS-Compatible Manual Reset Input 100µA Quiescent Current WDI Disable Feature (MAX706AP/AR/AS/AT) Watchdog Timer: 1.6s Timeout Reset Output Signal: Active-High Only (MAX706P, MAX706AP) Active-Low Only (MAX706R/S/T, MAX706AR/AS/AT) Active-High and Active-Low (MAX708R/S/T) Voltage Monitor for Power-Fail or Low-Battery Warning 8-Pin Surface-Mount Package Guaranteed active-low RESET Assertion to VCC = 1V

MAX706AP、MAX706AR、MAX706AS、MAX706AT、MAX706P、MAX706R、MAX706S、MAX706T、MAX708R、MAX708S、MAX708T：引脚配置 应用 电池供电设备 计算机 控制器 精确的µP电源监控 智能仪表 便携式仪表

数据手册DataSheet

关键参数

质量和环境数据

• MAX706S.pdf

相关产品

• MAX6358：双/三电压微处理器监控电路
• MAX6359：双/三电压微处理器监控电路
• MAX6360：双/三电压微处理器监控电路
• MAX6318：5引脚微处理器监控电路，带有看门狗定时及手动复位
• MAX6319：5引脚微处理器监控电路，带有看门狗定时及手动复位
• MAX6317：5引脚微处理器监控电路，带有看门狗定时及手动复位
• MAX6320：5引脚微处理器监控电路，带有看门狗定时及手动复位
• MAX6316：5引脚微处理器监控电路，带有看门狗定时及手动复位
• MAX6321：5引脚微处理器监控电路，带有看门狗定时及手动复位
• MAX6322：5引脚微处理器监控电路，带有看门狗定时及手动复位

订购型号