CBTL01023GM 3.3 V, one differential channel, 2 : 1 multiplexer/demultiplexer switch for PCI Express Gen3
CBTL01023 is a single differential channel, 2-to-1 multiplexer/demultiplexer switch for PCI Express Generation 3 (Gen3), or other high-speed serial interface applications. The CBTL01023 can switch one differential signal to one of two locations. Using a unique design technique, NXP has minimized the impedance of the switch such that the attenuation observed through the switch is negligible, and also minimized the channel-to-channel crosstalk, as required by the high-speed serial interface. CBTL01023 allows expansion of existing high speed ports for extremely low power
产品特点 Features
- Single bidirectional differential channel, 2 : 1 multiplexer/demultiplexer
- High-speed signal switching for PCIe Gen3 8 Gbit/s
- High bandwidth: 9 GHz at -3 dB
- Low insertion loss:
- -0.6 dB at 100 MHz
- -1.5 dB at 4.0 GHz
- Low off-state isolation: -30 dB at 4 GHz
- Low intra-pair skew: 5 ps typical
- VDD operating range: 3.3 V ±10 %
- Shutdown pin (XSD) for power-saving mode
- Standby current less than 1 μA
- ESD tolerance:
- XQFN10 package
|
应用
- PCIe Gen3
- DisplayPort 1.2
- USB 3.0
- SATA 6 Gbit/s
产品实物图
|
封装
型号 |
可订购的器件编号 |
订购码 (12NC) |
产品状态 |
封装 |
CBTL01023GM |
9352 959 95115 |
CBTL01023GM,115 |
量产 |
XQFN10
(SOT1049-3) |
订货和供应
型号 |
订购码 (12NC) |
可订购的器件编号 |
化学成分 |
CBTL01023GM |
9352 933 94128 |
CBTL01023GMIBS,128 |
CBTL01023GM |
CBTL01023GM 技术支持
档案名称 |
标题 |
类型 |
格式 |
CBTL01023GM |
3.3 V, one differential channel, 2 : 1 multiplexer/demultiplexer switch for PCI Express Gen3 |
Data sheet |
pdf |
AN10587 |
Interfacing NXP bridge IC with NXP ARM microcontroller
|
Application note |
pdf |
AN10417 |
SC16IS760/762 Fast IrDA mode
|
Application note |
pdf |
AN10428 |
UART-SPI Gateway for Philips SPI slave bridges
|
Application note |
pdf |
AN10462 |
SPI programming for Philips Bridge ICs
|
Application note |
pdf |
AN10485 |
SDA pin connection in SPI mode
|
Application note |
pdf |
AN10486 |
Automatic RS-485 address detection
|
Application note |
pdf |
AN10571 |
Sleep programming for NXP bridge ICs
|
Application note |
pdf |
AN10452 |
Interfacing Philips Bridge IC with Philips microcontroller
|
Application note |
pdf |
75015676 |
Low-power bridges for I2C or SPI to UART or IrDA or GPIO; NXP low-power bridges SC16IS750/52/60/62
|
Leaflet |
pdf |