MFRC63001HN High Performance MIFARE Reader Solution

The MFRC630 is a highly integrated transceiver IC for contactless communication at 13.56 MHz.

The MFRC630 transceiver IC supports the following operating modes:

The MFRC630’s internal transmitter is able to drive a reader/writer antenna designed to communicate with ISO/IEC 14443A/MIFARE cards and transponders without additional active circuitry. The digital module manages the complete ISO/IEC 14443A framing and error detection functionality (parity and CRC).

The MFRC630 supports MIFARE Classic 1K, MIFARE Classic 4K, MIFARE Ultralight, MIFARE Ultralight C, MIFARE PLUS and MIFARE DESFire products. The MFRC630 supports MIFARE higher transfer speeds of up to 848 kbit/s in both directions.

The following host interfaces are supported:

The MFRC630 supports the connection of a secure access module (SAM). A dedicated separate I2C interface is implemented for a connection of the SAM. The SAM can be used for high secure key storage and acts as a very performant crypto coprocessor. A dedicated SAM is available for connection to the MFRC630

产品特点 Features
  • High RF output power frontend IC for transfer speed up to 848 kbit/s
  • Supports ISO/IEC 14443 A/MIFARE
  • Supports MIFARE Classic encryption in read/write mode
  • Low-Power Card Detection
  • Antenna connection with minimum number of external components
  • Supported host interfaces:
    • SPI up to 10 Mbit/s
    • I²C-bus interfaces up to 400 kBd in Fast mode, up to 1000 kBd in Fast mode plus
    • RS232 Serial UART up to 1228.8 kBd, with voltage levels dependent on pin voltage supply
  • Separate I²C-bus interface for connection of a secure access module (SAM)
  • FIFO buffer with size of 512 byte for highest transaction performance
  • Flexible and efficient power saving modes including hard power down, standby and low-power card detection
  • Cost saving by integrated PLL to derive system CPU clock from 27.12 MHz RF quartz crystal
  • 3.3 V to 5 V power supply
  • Up to 8 free programmable input/output pins
  • Typical operating distance in read/write mode for communication to a ISO/IEC 14443A/MIFARE Card up to 12 cm, depending on the antenna size and tuning
应用
  • Electronic payment systems
  • Identification systems
  • Access control systems
  • Subscriber services
  • Digital content systems
产品实物图
MFRC63001HN 产品实物图
封装
型号 订购码 (12NC) 可订购的器件编号 产品状态 封装
MFRC63001HN     量产 HVQFN32 (SOT617-1)
订货和供应
型号 订购码 (12NC) 可订购的器件编号 化学成分
MFRC63001HN     MFRC63001HN
MFRC63001HN 技术支持
档案名称 标题 类型 格式
AN077925 AN Micore Reader IC Family; Directly Matched Antenna Design Application note pdf
AN98080 Read/write devices based on the HITAG read/write IC HTRC110 Application note pdf
AN11022 CLRC663 Quickstart Guide Application note pdf
AN11021 CLRC663, MFRC631, MFRC630, SLRC610 Software Design Guide for NXPRDLib Application note pdf
AN11116 Using the RS232 serial evaluation boards on a USB port Application note pdf
AN11145 CLRC663, MFRC630, MFRC631, SLRC610 PC-Serial RS232 and low power card detection Quick Start Guide Application note pdf
AN11211 Quick Start Up Guide RC663 Blueboard Application note pdf
AN11256 Migration guide CLRC663 to derivates Application note pdf
AN11342 How to Scale Down the NXP Reader Library Application note pdf
939775017138 Next-generation multiprotocol High Performance MIFARE Reader Solution (CLRC663 only) Leaflet pdf
939775017290 The next generation of multiprotocol contactless proximity reader ICs Leaflet pdf
AN11246_239810 CLRC663, MFRC631, MFRC630, CLRC610 Directly Matched Antenna design - advanced user Other type zip
AN11020_206110 Matching Calculations CLRC663, MFRC631, MFRC630, SLRC610 Other type zip
210910 CLRC663 redboard scripts Software zip
200312 NXP Reader Library version 2.1 with Visual C++ project Software zip
NXP_RFID_213911 Eagle parts library Software zip
UM10663 NXP Reader Library User Manual based on CLRC663 and PN512 Blueboard Reader projects User manual pdf