NXQ1TXA5:Qi-compliant 5 V wireless charging controller

The NXQ1TXA5 is a controller/driver IC for a 5 V Qi-compliant wireless charger. It offers a fully integrated solution that uses a 5 V full-bridge power stage to drive a power transmitter, as defined in the 5 V A5, A11 and A12 Qi standards.

The NXQ1TXA5 has dedicated analog ping circuitry to detect available devices, according to the Wireless Power Consortium (WPC) Qi standard, which achieves extremely low standby power consumption. If a Qi-compliant receiver is detected, it will attempt to communicate with it. If the receiver is recognized, it will safely initiate wireless power transfer from the transmitter to the receiver, while monitoring for any fault conditions like interfering metal objects or overheat conditions. The device is optimized to operate from a USB power supply and can handle also limited supply power conditions by automatic adjustment of the output power, called Smart Power Limiting (SPL).

For the user interface LED outputs are available with several blinking modes as well as a buzzer output. Additional features like Static Power Reduction (SPR) allow multiple NXQ1TXA5 based transmitters to operate from a single USB power supply.

The NXQ1TXA5 is available in a 5 x 5 mm, 32 pin HVQFN package with 0.5 mm pitch.

特性和优势
    • Single chip WPC1.1.2 Qi-compliant device for A5/A11/A16 5 V single coil low power transmitter
    • Integrated full-bridge power stage for optimal coil drive with high efficiency and low EMI radiation
    • Extremely low-power receiver detection circuitry; standby power less than 10 mW
    • Power stage fully protected against over currents and over temperature
    • 2 LED and buzzer outputs
    • Thermally protected
    • Small HVQFN 32-pin package (5 x 5 mm)
    • FOD with automatic switching between V1.1 and V1.0 for legacy receiver support
    • Smart Power Limiting (SPL) function to adapt to power-limited 5 V supplies
    • Static Power Reduction (SPR) function for multiple NXQ1TXA5 on single USB power supply
应用
    • Wireless Power Consortium (WPC) certified/compliant Qi wireless power transmitters
产品图片
演示板
NXQ1TXA5DB1340
NXQ1TXA5DB1340
封装与包装
型号封装Outline versionReflow-/Wave soldering包装产品状态标示可订购的器件编号, (订购码 (12NC))
NXQ1TXA5/404
HVQFN32
(SOT617-3)
sot617-3_posot617-3_frReel 13" Q1/T1量产Standard MarkingNXQ1TXA5/404J( 9353 062 71118 )
无铅环保信息
型号可订购的器件编号RoHS / RHF无铅转换日期潮湿敏感度等级MSL LF
NXQ1TXA5/404NXQ1TXA5/404JAlways Pb-free11
文档资料
档案名称标题类型格式日期
NXQ1TXA5_SDSOne-chip 5 V Qi wireless transmitterShort data sheetpdf2015-07-30
SOT617-3_518HVQFN32; Reel pack; SMD, 13" Q1/T1 Standard product orientation Orderable part number ending ,518 or Y Ordering code (12NC) ending 518Packingpdf2015-04-01
sot617-3_frFootprint for reflow soldering SOT617-3Reflow solderingpdf2009-10-08
sot617-3_poplastic thermal enhanced very thin quad flat package; no leads; 32 terminals; body 5 x 5 x 0.85 mmOutline drawingpdf2002-10-21
SOT617-3_118HVQFN32; Reel pack; SMD, 13" Q1/T1 Standard product orientation Orderable part number ending ,118 or J Ordering code (12NC) ending 118Packingpdf2014-04-02
订购信息
型号订购码 (12NC)可订购的器件编号
NXQ1TXA5/4049353 062 71118NXQ1TXA5/404J
One-chip 5 V Qi wireless transmitter NXQ1TXA5DB1340
Reel 13" Q1/T1 in Drypack LPC11U35FHI33
Footprint for reflow soldering SOT617-3 OL2381AHN
plastic thermal enhanced very thin quad flat package; no leads; 32 terminals; body 5 x 5 x 0.85 mm OL2381AHN
HVQFN32; Reel pack; SMD, 13" Q1/T1 Standard product orientation Orderable part number ending ,118 or J Ordering code... pca8561_automotive