MC100E141: ECL 8-Bit Shift Register _ BDTIC 中国领先电子元器件代理商

首页 > ON 安森美 > 时钟及数据分配 > 触发器、锁存器及寄存器 > MC100E141

MC100E141: ECL 8-Bit Shift Register

The MC10E/100E141 is an 8-bit full-function shift register. The E141 performs serial/parallel in and serial/parallel out, shifting in either direction. The eight inputs D0-D7 accept parallel input data, while DL/DR accept serial input data for left/right shifting. The Qn outputs do not need to be terminated for the shift operation to function. To minimize noise and power, any Q output not used should be left unterminated. The select pins, SEL0 and SEL1, select one of four modes of operation: Load, Hold, Shift Left, Shift Right, according to the Function Table. Input data is accepted a set-up time before the positive clock edge. A HIGH on the Master Reset (MR) pin asynchronously resets all the registers to zero.The 100 Series contains temperature compensation.

特性

700MHz Min. Shift Frequency
8-Bit
Full-Function, Bi-Directional
Asynchronous Master Reset
Pin-Compatible with E241
PECL Mode Operating Range: VCC = 4.2 V to 5.7 V with VEE = 0 V
75kW Input Pulldown Resistors
NECL Mode Operating Range: VCC = 0 V with VEE = -4.2 V to -5.7 V
Internal Input Pulldown Resistors
ESD Protection: > 2 kV HBM, > 200 V MM
Meets or Exceeds JEDEC Spec EIA/JESD78 IC Latchup Test
Moisture Sensitivity Level 1For Additional Information, see Application Note AND8003/D
Flammability Rating: UL-94 code V-0 @ 1/8", Oxygen Index 28 to 34
Transistor Count = 565 devices
Pb-Free Packages are Available

应用注释 (18)

Document Title	Document ID/Size	Revision
AC Characteristics of ECL Devices	AND8090/D (896.0kB)	1
Clock Generation and Clock and Data Marking and Ordering Information Guide	AND8002/D (66kB)	11
Clock Management Design Using Low Skew and Low Jitter Devices	TND301/D (205.0kB)	0
Designing with PECL (ECL at +5.0 V)	AN1406/D (105.0kB)	2
ECL Clock Distribution Techniques	AN1405/D (54.0kB)	1
ECLinPS and ECLinPS Lite SPICE I/O Modeling Kit	AN1503/D (120.0kB)	6
ECLinPS™ Circuit Performance at Non-Standard VIH Levels	AN1404/D (51.0kB)	1
ECLinPS, ECLinPS Lite, ECLinPS Plus and GigaComm Marking and Ordering Information Guide	AND8002 (66kB)	11
Interfacing Between LVDS and ECL	AN1568/D (121.0kB)	11
Interfacing with ECLinPS™	AND8066/D (58.0kB)	2
Metastability and the ECLinPS Family	AN1504/D (103.0kB)	3
Odd Number Divide By Counters with 50% Outputs and Synchronous Clocks	AND8001/D (90.0kB)	0
Phase Lock Loop General Operations	AND8040/D (64.0kB)	3
Storage and Handling of Drypack Surface Mount Device	AND8003/D (106.0kB)	1
Termination of ECL Logic Devices	AND8020/D (176.0kB)	6
The ECL Translator Guide	AN1672/D (142.0kB)	12
Thermal Analysis and Reliability of WIRE BONDED ECL	AND8072/D (119.0kB)	5
Using Wire-OR Ties in ECLInPS™ Designs	AN1650/D (1130.0kB)	3