MC100EP446: Serial to Parallel Converter, 3.3 V / 5 V, 8-Bit, CMOS / ECL / TTL Data Input
The MC10/100EP446 is an integrated 8-bit parallel to serial data converter. The device is designed with unique circuit topology to operate for NRZ data rates up to 3.2 Gb/s. The conversion sequence from parallel data into a serial data stream is from bit D0 to D7. The parallel input pins D0-D7 are configurable to be threshold controlled by CMOS, ECL, or TTL level signals. The serial data rate output can be selected at internal clock data rate or twice the internal data rate using the CKSEL pin. Control pins are provided to reset (SYNC) and disable internal clock circuitry (CKEN). In either CKSEL modes, the internal flip-flops are triggered on the rising edge for CLK and the multiplexers are switched on the falling edge of CLK, therefore, all associated specification limits are referenced to the negative edge of the clock input. Additionally, VBB pin is provided for single-ended input condition. The 100 Series devices contain temperature compensation network.
特性- 3.2 Gb/s Typical Data Rate Capability
- Differential Clock and Serial Inputs
- VBB Output for Single-ended Input Applications
- Asynchronous Data Reset (SYNC)
- PECL Mode Operating Range: VCC = 3.0 V to 5.5 V with VEE = 0 V
- NECL Mode Operating Range: VCC = 0 V with VEE = -3.0 V to -5.5 V
- Open Input Default State
- Safety Clamp on Inputs
- Parallel Interface Can Support PECL, TTL and CMOS
- Pb-Free Packages are Available
|
应用- Parallel to Serial Conversion
|
封装
应用注释 (13)
数据表 (1)
仿真模型 (2)
封装图纸 (1)
产品订购型号
产品 | 状况 | Compliance | 封装 | MSL* | 容器 | 预算价格 (1千个数量的单价) |
---|
MC100EP446FAG | Active | Pb-free
Halide free | LQFP-32 | 联系BDTIC | 2 | Tray JEDEC | 250 | 联系BDTIC |
MC100EP446FAR2G | Lifetime | Pb-free
Halide free | LQFP-32 | 联系BDTIC | 2 | Tape and Reel | 2000 | |
MC100EP446MNG | Active | Pb-free
Halide free | QFN-32 | 488AM | 1 | Tube | 74 | 联系BDTIC |
MC100EP446MNR4G | Lifetime | Pb-free
Halide free | QFN-32 | 488AM | 1 | Tape and Reel | 1000 | |
订购产品技术参数
Product | Type | Bits | Input Level | Output Level | VCC Typ (V) | fdr Typ (Gb/sec) | tpd Typ (ns) | tsu Min (ns) | th Min (ns) | tJitter Typ (ps) | tR & tF Max (ps) |
---|
MC100EP446FAG | Parallel/Serial | 8 | CML
ECL | ECL | 5
3.3 | 3.4 | 0.8 | -0.45 | -0.6 | 0.2 | 150 |
MC100EP446MNG | Parallel/Serial | 8 | ECL
CML | ECL | 5
3.3 | 3.4 | 0.8 | -0.45 | -0.6 | 0.2 | 150 |