MC100LVEL16: Differential Receiver

The MC100LVEL16 is a differential receiver. The device is functionally equivalent to the EL16 device, operating from a 3.3 V supply. The LVEL16 exhibits a wider VIHCMR range than its EL16 counterpart. With output transition times and propagation delays comparable to the EL16 the LVEL16 is ideally suited for interfacing with high frequency sources at 3.3 V supplies. Under open input conditions, the Q input will be pulled down to VEE and the Qbar input will be biased to VCC/2. This condition will force the Q output low. The VBB pin, an internally generated voltage supply, is available to this device only. For single-ended input conditions, the unused differential input is connected to VBB as a switching reference voltage. VBB may also rebias AC coupled inputs. When used, decouple VBB and VCC via a 0.01 F capacitor and limit current sourcing or sinking to 0.5 mA. When not used, VBB should be left open.

特性
  • 300 ps Propagation Delay
  • High Bandwidth Output Transitions
  • ESD Protection: >2 KV HBM, > 200 V MM
  • The 100 Series Contains Temperature Compensation
  • PECL Mode Operating Range: VCC= 3.0 V to 3.8 V with VEE= 0 V
  • NECL Mode Operating Range: VCC= 0 V with VEE= -3.0 V to -3.8 V
  • Internal Input Pulldown Resistors on D, Pullup and Pulldown Resistors on Dbar
  • Q Output will Default LOW with Inputs Open or at VEE
  • Meets or Exceeds JEDEC Spec EIA/JESD78 IC Latchup Test
  • Moisture Sensitivity Level 1For Additional Information, see Application Note AND8003/D
  • Flammability Rating: UL-94 code V-0 @ 1/8", Oxygen Index 28 to 34
  • Transistor Count = 79 devices
封装
应用注释 (14)
Document TitleDocument ID/SizeRevisionRevision Date
AC Characteristics of ECL DevicesAND8090/D (896.0kB)1
Clock Generation and Clock and Data Marking and Ordering Information GuideAND8002/D (71kB)12
Clock Management Design Using Low Skew and Low Jitter DevicesTND301/D (205.0kB)0
Designing with PECL (ECL at +5.0 V)AN1406/D (105.0kB)2
ECL Clock Distribution TechniquesAN1405/D (54.0kB)1
Interfacing Between LVDS and ECLAN1568/D (121.0kB)11
Interfacing with ECLinPSAND8066/D (72kB)3
Odd Number Divide By Counters with 50% Outputs and Synchronous ClocksAND8001/D (90.0kB)0
Phase Lock Loop General OperationsAND8040/D (64.0kB)3
Storage and Handling of Drypack Surface Mount DeviceAND8003/D (49kB)2Mar, 2016
Termination of ECL Logic DevicesAND8020/D (176.0kB)6
The ECL Translator GuideAN1672/D (142.0kB)12
Thermal Analysis and Reliability of WIRE BONDED ECLAND8072/D (119.0kB)5
Using Wire-OR Ties in ECLInPS™ DesignsAN1650/D (1130.0kB)3
数据表 (1)
Document TitleDocument ID/SizeRevisionRevision Date
3.3V ECL Differential ReceiverMC100LVEL16/D (95kB)7
仿真模型 (2)
Document TitleDocument ID/SizeRevisionRevision Date
IBIS Model for mc100lvel16d 3.3VMC100LVEL16D_33.IBS (5.0kB)6
Low Voltage ECLinPS SPICE Modeling KitAN1560/D (88.0kB)5
封装图纸 (3)
Document TitleDocument ID/SizeRevision
DFN8 2.0x2.0x0.9mm, 0.5p506AA (31.8kB)F
SOIC-8 Narrow Body751-07 (62.6kB)AK
TSSOP 8 3.0x3.0x0.95 mm948R-02 (77.3kB)A
产品订购型号
产品状况Compliance封装MSL*容器预算价格 (1千个数量的单价)
MC100LVEL16DGActivePb-free Halide freeSOIC-8751-071Tube98联系BDTIC
MC100LVEL16DR2GActivePb-free Halide freeSOIC-8751-071Tape and Reel2500联系BDTIC
MC100LVEL16DTGActivePb-free Halide freeTSSOP-8948R-023Tube100联系BDTIC
MC100LVEL16DTR2GActivePb-free Halide freeTSSOP-8948R-023Tape and Reel2500联系BDTIC
MC100LVEL16MNR4GActivePb-free Halide freeDFN-8506AA1Tape and Reel1000联系BDTIC
订购产品技术参数
ProductTypeChannelsInput / Output RatioInput LevelOutput LevelVCC Typ (V)tJitterRMS Typ (ps)tskew(o-o) Max (ps)tpd Typ (ns)tR & tF Max (ps)fmaxClock Typ (MHz)fmaxData Typ (Mbps)
MC100LVEL16DGSignal Driver11:1ECL LVDSECL3.30.7200.33201000
MC100LVEL16DR2GSignal Driver11:1LVDS ECLECL3.30.7200.33201000
MC100LVEL16DTGSignal Driver11:1LVDS ECLECL3.30.7200.33201000
MC100LVEL16DTR2GSignal Driver11:1ECL LVDSECL3.30.7200.33201000
MC100LVEL16MNR4GSignal Driver11:1LVDS ECLECL3.30.7200.33201000
3.3V ECL Differential Receiver (95kB) MC100LVEL16
AC Characteristics of ECL Devices NB100LVEP91
Clock Generation and Clock and Data Marking and Ordering Information Guide NB100LVEP91
Clock Management Design Using Low Skew and Low Jitter Devices MC10H604
Designing with PECL (ECL at +5.0 V) NB100LVEP91
ECL Clock Distribution Techniques NB100LVEP91
Interfacing Between LVDS and ECL NB100ELT23L
Interfacing with ECLinPS NB100LVEP91
Odd Number Divide By Counters with 50% Outputs and Synchronous Clocks NUP4201
Phase Lock Loop General Operations MC10H604
Storage and Handling of Drypack Surface Mount Device NB3U23C
Termination of ECL Logic Devices NB100LVEP91
The ECL Translator Guide NB100LVEP91
Thermal Analysis and Reliability of WIRE BONDED ECL NB100LVEP91
Using Wire-OR Ties in ECLInPS™ Designs MC10H351
IBIS Model for mc100lvel16d 3.3V MC100LVEL16
Low Voltage ECLinPS SPICE Modeling Kit MC100LVELT23
SOIC-8 Narrow Body CM1216
TSSOP 8 3.0x3.0x0.95 mm NB100ELT23L
DFN8 2.0x2.0x0.9mm, 0.5p NUF4220