NCP370: Full Overvoltage and Overcurrent Protection Circuit

The NCP370 is an overvoltage, overcurrent and reverse control device. Two main modes are available by setting logic pins.First mode is Direct Mode from Wall Adapter to the system. In this mode the system is both positive and negative overvoltage protected up to +28 V and down to -28 V. The wall adapter is disconnected from the system if the input voltage exceeds the overvoltage (OVLO) or undervoltage (UVLO) thresholds. At powerup, the Vout turns on 30 ms after the Vin exceeds the undervoltage threshold.The second mode, called the Reverse Mode, allows an external accessory to be powered by the system battery or a boost converter. Here, the external accessory would be connected to the device input (bottom connector of system) and the device battery would be at the device output. In this case, overcurrent protection is activated to prevent accessory faults and battery discharge. Thanks to the NCP370 using an internal NMOS, the system cost and the PCB area of the application board are minimized. The NCP370 provides a negative going flag (FLAG(BAR)) output which alerts the system that a fault has occurred. In addition, the device has ESD protected input (15 kV Air) when bypassed with a 1.0 µF or larger capacitor.

特性
  • Overvoltage Protection up to 28 V
  • Overvoltage Protection down to -28 V
  • On-Chip Low RDS(on) NMOS Transistor: 135 mohm
  • Overvoltage Lockout (OVLO)
  • Undervoltage Lockout (UVLO)
  • Alert FLAG(BAR) Output
  • Direct mode DIR(BAR) Input
  • Reverse mode REV(BAR) Input
  • Reverse Overcurrent protection
  • This is a Pb-Free Device
  • Compliance to IEC61000-4-2 (Level 4), 8.0 kV (Contact), and 15 kV (Air)
  • Soft start
应用
  • Cell Phones, Camera Phones, Digital Still Cameras, Personal Digital Applications, and MP3 Players
数据表 (1)
Document TitleDocument ID/SizeRevisionRevision Date
Overvoltage and Overcurrent Protection CircuitNCP370/D (206.0kB)6
封装图纸 (1)
Document TitleDocument ID/SizeRevision
LLGA12 3x3, 0.5P513AK (44.5kB)O
评估板文档 (4)
Document TitleDocument ID/SizeRevisionRevision Date
NCP370GEVB Bill of Materials ROHS CompliantNCP370GEVB_BOM_ROHS.PDF (157.0kB)2
NCP370GEVB Gerber Layout Files (Zip Format)NCP370GEVB_GERBER.ZIP (66.0kB)0
NCP370GEVB SchematicNCP370GEVB_SCHEMATIC.PDF (123.0kB)2
NCP370GEVB Test ProcedureNCP370GEVB_TEST_PROCEDURE.PDF (205.0kB)2
评估板与开发工具
产品状况Compliance简短说明
NCP370GEVBActivePb-freeOvervoltage, Overcurrent & Reverse Control Device Evaluation Board
产品订购型号
产品状况Compliance封装MSL*容器预算价格 (1千个数量的单价)
NCP370MUAITXGActivePb-free Halide freeLLGA-12513AK1Tape and Reel3000$0.5333
订购产品技术参数
ProductVCC Min (V)VCC Max (V)P(AV) Max (W)VIT+ Typ (V)VIT Typ (V)IDDH Max (µA)TA Min (°C)TA Max (°C)
NCP370MUAITXG-28282.56.62.7280-4085
Overvoltage and Overcurrent Protection Circuit (206.0kB) NCP370
NCP370GEVB BOM ROHS NCP370GEVB
NCP370GEVB GERBER NCP370GEVB
NCP370GEVB SCHEMATIC NCP370GEVB
NCP370GEVB TEST PROCEDURE NCP370GEVB
LLGA12 3x3, 0.5P NCP373