NCP391: Positive Overvoltage Protection Controller with Internal Low RON NMOS FET
The NCP391 is able to disconnect the systems from its output pin in case wrong input operating conditions are detected. The system is positive overvoltage protected up to +28 V. Due to this device using internal NMOS, no external device is necesary, reducing the system cost and the PCB area of the application board. The NCP391 is able to instantaneously disconnect the output from the input, due to integrated Low Ron Power NMOS (120 mΩ, if the input voltage exceeds the overvoltage threshold (OVLO) or undervoltage threshold (UVLO)). At powerup (EN(BAR) pin = low level), the Vout turns on ton after the Vin exceeds the undervoltage threshold. The NCP391 provides a negative going flag(FLAG(BAR)) output, which alerts the system that a fault has occurred.In addition, the device has ESD-protected input (15 kV Air) when bypassed with a 1.0 µF or larger capacitor.
特性- Overvoltage Protection up to 28 V
- On-Chip Low RDS(on) NMOS Transistor: 120 mΩ
- Overvoltage Lockout (OVLO)
- Undervoltage Lockout (UVLO)
- Internal Soft start
- Alert FLAG(BAR) Output
- Shutdown EN(BAR) Input
- ESD Ratings: Machine Model = B, Human Body Model = 3
| 优势- Low voltage battery charger can be used
- No external pass Mosfet is required
|
应用 | 终端产品- Cell Phones, Camera Phones, Digital Still Cameras, PDA, Tablet, Wireless accessory and MP3 Players
|
封装
数据表 (1)
封装图纸 (2)
产品订购型号
| 产品 | 状况 | Compliance | 封装 | MSL* | 容器 | 预算价格 (1千个数量的单价） |
|---|
| NCP391FCALT2G | Active | Pb-free
Halide free | WLCSP-6 | 499BP | 1 | Die Surf Tape and Reel | 3000 | $0.4 |
| NCP391FCCADT2G | Active | Pb-free
Halide free | WLCSP-6 | 567JW | 1 | Die Surf Tape and Reel | 3000 | $0.4 |
订购产品技术参数
| Product | VCC Min (V) | VCC Max (V) | P(AV) Max (W) | VIT+ Typ (V) | VIT Typ (V) | IDDH Max (µA) | TA Min (°C) | TA Max (°C) |
|---|
| NCP391FCALT2G | 1.2 | 28 | 0.69 | 7.4 | 7.3 | 170 | 40 | 125 |
| NCP391FCCADT2G | 1.2 | 28 | 0.69 | 7.4 | 7.3 | 170 | 40 | 125 |
