NCP692MNADT2GEVB: CMOS LDO Adjustable Evaluation Board

The NCP692 Adjustable CMOS LDO family provides 1 A of output current with enhanced ESD in fixed output voltage options from 1.25 V to 5.0 V. These devices are designed for space constrained and portable battery powered applications and offer additional features such as low Dropout Voltage, high Power Supply Rejection Ratio (PSRR), low Quiescent and Ground Current consumption, low Noise operation, Short Circuit and Thermal Protection. NCP692 Adjustable LDO is designed to be used with low cost ceramic capacitors and the minimum value of 1uF output capacitance is required. The NCP692 device is equipped with Active High Enable pin, Active Output Discharge, Current Limit and Thermal Shutdown Protection. Finally the Surface Mount DFN3x3 package with Expose Pad allows saving PCB space and effectively dissipating heat through the PCB copper area. This demonstration board operates from a dc input voltage VIN < 6V and produces the output voltage set by the external feedback resistors. External waveform generator could be connected to the EN (Enable) pin in order to verify the ON/OFF operation.

评估/开发工具信息
产品状况Compliance简短说明所用产品
NCP692MNADT2GEVBActivePb-freeCMOS LDO Adjustable Evaluation BoardNCP692MNADJT2G
技术文档
类型文档标题文档编号/大小修订号
Eval Board: BOMNCP692MNADT2GEVB Bill of Materials ROHS CompliantNCP692MNADT2GEVB_BOM_ROHS.REV0.PDF - 103.0 KB0
Eval Board: GerberNCP692MNADT2GEVB Gerber Layout Files (Zip Format)NCP692MNADT2GEVB_GERBER.ZIP - 19.0 KB0
Eval Board: SchematicNCP692MNADT2GEVB SchematicNCP692MNADT2GEVB_SCHEMATIC.PDF - 68.0 KB0
Eval Board: Test ProcedureNCP692MNADT2GEVB Test ProcedureNCP692MNADT2GEVB_TEST_PROCEDURE.PDF - 137.0 KB0
NCP692MNADT2GEVB BOM ROHS NCP692MNADT2GEVB
NCP692MNADT2GEVB GERBER NCP692MNADT2GEVB
NCP692MNADT2GEVB SCHEMATIC NCP692MNADT2GEVB
NCP692MNADT2GEVB TEST PROCEDURE NCP692MNADT2GEVB
NCP692MNADT2GEVB