NCV70521: SPI Stepper Motor Driver
The NCV70521 is a micro-stepping stepper motor driver for bipolar stepper motors. The chip is connected through I/O pins and an SPI interface with an external microcontroller. The NCV70521 contains a current-translation table and takes the next micro-step depending on the clock signal on the NXT input pin and the status of the DIR (direction) register or input pin. The chip provides a so-called Speed and Load Angle output. This allows the creation of stall detection algorithms and control loops based on load-angle to adjust torque and speed. It uses a proprietary PWM algorithm for reliable current control. The NCV70521 is implemented in I2T100 technology, enabling both high voltage analog circuitry and digital functionality on the same chip. The chip is fully compatible with the automotive voltage requirements. The NCV70521 is ideally suited for general purpose stepper motor applications in the automotive environment.
特性- Dual H-Bridge for 2 phase stepper motors
- Programmable peak-current up to 1.5 A using a 5-bit current DAC
- On-chip current translator
- SPI interface
- Speed and load-angle output
- 7 step modes from full-step up to 32 micro-steps
- Fully integrated current-sense
- PWM current control with automatic selection of fast and slow decay
- Low EMC PWM with selectable voltage slopes
- Active fly-back diodes
- Full output protection and diagnosis
- Thermal warning and shut-down
- Compatible with 5V and 3.3V microcontrollers
|
终端产品- Automotive headlight position
Flap/valve control in engine management
Folding displays
HVAC and LPG expansion valves
|
应用注释 (5)
封装图纸 (1)
| Document Title | Document ID/Size | Revision |
|---|
| NQFP32, 7x7 | 560AA (72.5kB) | O |
辅助小册子 (1)
评估板文档 (4)
数据表 (1)
评估板与开发工具
| 产品 | 状况 | Compliance | 简短说明 |
|---|
| NCV7052XGEVK | Active | Pb-free | NCV7052X Family Evaluation Kit |
产品订购型号
| 产品 | 状况 | Compliance | 具体说明 | 封装 | MSL* | 容器 | 预算价格 (1千个数量的单价） |
|---|
| NCV70521MN003G | Active | AEC Qualified
PPAP Capable
Pb-free
Halide free | SPI Stepper Motor Driver | NQFP-32 | 560AA | 3 | Tube | 40 | 联系BDTIC |
| NCV70521MN003R2G | Active | AEC Qualified
PPAP Capable
Pb-free
Halide free | SPI Stepper Motor Driver | NQFP-32 | 560AA | 3 | Tape and Reel | 2500 | 联系BDTIC |
订购产品技术参数
| Product | Type | VM Min (V) | VM Max (V) | VCC Min (V) | VCC Max (V) | IO Max (A) | IO Peak Max (A) | Step Resolution | Control Type | Feedback Method | Current Sense | Regulator Output | Fault Detection | Flyback Protection | RDS(on) Typ (Ω) |
|---|
| NCV70521MN003G | Stepper | | | 6 | 40 | 1.5 | | | | | | | | | |
| NCV70521MN003R2G | Stepper | | | 6 | 40 | 1.5 | | | | | | | | | |
