FL-101 FlashLINK JTAG Programmer
The FL-101 is a FlashLINK JTAG programming cable for PSD and UPSD microcontroller families. Driven by a PC through a parallel port, it allows In-System Programming (ISP) of PSD and UPSD devices located on an application board.
技术特性
- Allows PC or Notebook parallel port to program UPSD and PSD devices using PSDsoft Express software development tool.
- Supports IEEE 1149.1 JTAG signals (TCK, TMS, TDI, TDO).
- Supports additional signals (TERRand TSTAT) to reduce programming time.
- Single FlashLINK cable assembly supports both 3.3 V and 5 V target devices with no manual configuration. Target device may operate from 2.7 V to 5.5 V.
- Flying Lead cable included to adapt to any target connector using 0.025" square posts.
- Loop Test cable included to validate PC parallel port operation.
FL-101 订购信息
| 订购型号 |
产品状态 |
美金价格 |
数量 |
封装 |
包装形式 |
温度范围 |
材料声明 |
| FL-101 |
NRND |
59 |
|
|
|
|
FL-101 |
DATA BRIEF
| 描述 |
版本 |
大小 |
| DB1451: FlashLINK JTAG Programmer |
1 |
45KB |
APPLICATION NOTES
| 描述 |
版本 |
大小 |
| AN1504: Starting a PWM signal directly at high level using the ST7 16-bit timer |
1 |
171KB |
| AN1813: ST7 FLASH STICK and ST7MDTxx-EPB programmers in-circuit programming considerations |
1 |
266KB |
| AN1015: Software techniques for improving microcontroller EMC performance |
1 |
105KB |
USER MANUALS
| 描述 |
版本 |
大小 |
| UM0044: FlashLINK JTAG programming cable for PSD and uPSD |
5 |
192KB |
