This 1-bit to 4-bit address driver is designed for 1.65-V to 3.6-V VCC operation.
The SN74ALVCH16344 is used in applications in which four separate memory locations must be addressed by a single address.
To ensure the high-impedance state during power up or power down, OE\ should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
Active bus-hold circuitry holds unused or undriven inputs at a valid logic state. Use of pullup or pulldown resistors with the bus-hold circuitry is not recommended
| SN74ALVCH16344 | |
| Voltage Nodes(V) | 3.3, 2.7, 2.5, 1.8 |
| Vcc range(V) | 1.65 to 3.6 |
| Logic | True |
| Input Level | LVTTL |
| Output Level | LVTTL |
| Output Drive(mA) | -24/24 |
| No. of Outputs | 32 |
| tpd max(ns) | 4 |
| Static Current | 0.04 |
| Rating | Catalog |
| Technology Family | ALVC |
