TLE4275-Q1 | |
Iout(Max)(A) | 0.2 |
Vdo(Typ)(mV) | 0.175 |
Iq(Typ)(mA) | 0.031 |
Vin(Min)(V) | 2 |
Vin(Max)(V) | 5.5 |
Accuracy(%) | 2 |
Output Capacitor(uF) | 1 |
Output Capacitor Type | Ceramic |
Fixed Output Options(V) | 3.3 |
Pin/Package | 5SOT |
Rating | Automotive |
Regulated Outputs(#) | 1 |
The TLE4275 is a monolithic integrated low-dropout voltage regulator offered in a 5-pin TO package. An input voltage up to 45 V is regulated to VOUT = 5 V (typ). The device can drive loads up to 450 mA and is short-circuit proof. At overtemperature, the TLE4275 is turned off by the incorporated temperature protection. A reset signal is generated for an output voltage, VOUT,rt, of 4.65 V (typ). The reset delay time can be programmed by the external delay capacitor.
The input capacitor, CIN, compensates for line fluctuation. Using a resistor of approximately
1 Ω, in series with CIN, dampens the oscillation of input inductivity and input capacitance. The output capacitor, COUT, stabilizes the regulation circuit. Stability is specified at COUT ≥ 22 µF and ESR ≤ 5 Ω, within the operating temperature range.
The control amplifier compares a reference voltage to a voltage that is proportional to the output voltage and drives the base of the series transistor via a buffer. Saturation control as a function of the load current prevents any oversaturation of the power element. The device also incorporates a number of internal circuits for protection against:
器件 | 状态 | 温度 (oC) | 价格(美元) | 封装 | 引脚 | 封装数量 | 封装载体 | 丝印标记 |
TLE4275QKTTRQ1 | ACTIVE | -40 to 125 | 0.90 | 1ku | DDPAK/TO-263 (KTT) | 5 | 500 | LARGE T&R | TLE4275Q |
TLE4275QKVURQ1 | ACTIVE | -40 to 125 | 0.80 | 1ku | PFM (KVU) | 5 | 2500 | LARGE T&R | TLE4275Q |
器件 | 环保计划* | 铅/焊球涂层 | MSL 等级/回流焊峰 | 环保信息与无铅 (Pb-free) | DPPM / MTBF / FIT 率 |
TLE4275QKTTRQ1 | Green (RoHS & no Sb/Br) | CU SN | Level-3-245C-168 HR | TLE4275QKTTRQ1 | TLE4275QKTTRQ1 |
TLE4275QKVURQ1 | Green (RoHS & no Sb/Br) | CU SN | Level-3-260C-168 HR | TLE4275QKVURQ1 | TLE4275QKVURQ1 |