TPA0172 具有立体声耳机驱动和 I2C 控制的立体声 AB 类音频放大器

The TPA0172 is a stereo audio power amplifier in a 24-pin TSSOP thermally enhanced package capable of delivering 2 W of continuous RMS power per channel into 4- loads. This device utilizes the I2C bus to control its functionality, which minimizes the number of external components needed, simplifies the design, and frees up board space for other features. When driving 1 W into 8- speakers, the TPA0172 has less than 0.2% THD+N from 20 Hz to 20 kHz.

Included within this device is integrated depop circuitry that virtually eliminates transients that cause noise in the speakers at power up, power down, and while transitioning in and out of shutdown mode.

The overall gain of the amplifier is controlled digitally by the volume control registers which are programmed via the I2C interface

LM4995
Speaker Channels Stereo    
Headphone Channels Stereo    
Speaker Amp Type Class-AB
Output Power (W) 2    
PSRR (dB) 75    
Supply Min (Min) (Volt) 4.5    
Supply Max (Max) (Volt) 5.5
TPA0172 特性
TPA0172 芯片订购指南
器件 状态 温度 价格(美元) 封装 | 引脚 封装数量 | 封装载体 丝印标记
TPA0172PWP ACTIVE -40 to 85 3.15 | 1ku HTSSOP (PWP) | 24 60 | TUBE  
TPA0172PWPG4 ACTIVE -40 to 85 3.15 | 1ku HTSSOP (PWP) | 24 60 | TUBE  
TPA0172PWPR ACTIVE -40 to 85 2.60 | 1ku HTSSOP (PWP) | 24 2000 | LARGE T&R  
TPA0172PWPRG4 ACTIVE -40 to 85 2.60 | 1ku HTSSOP (PWP) | 24 2000 | LARGE T&R  
TPA0172 质量与无铅数据
器件 环保计划* 铅/焊球涂层 MSL 等级/回流焊峰 环保信息与无铅 (Pb-free) DPPM / MTBF / FIT 率
TPA0172PWP Green (RoHS & no Sb/Br)  CU NIPDAU  Level-2-260C-1 YEAR TPA0172PWP TPA0172PWP
TPA0172PWPG4 Green (RoHS & no Sb/Br)  CU NIPDAU  Level-2-260C-1 YEAR TPA0172PWPG4 TPA0172PWPG4
TPA0172PWPR Green (RoHS & no Sb/Br)  CU NIPDAU  Level-2-260C-1 YEAR TPA0172PWPR TPA0172PWPR
TPA0172PWPRG4 Green (RoHS & no Sb/Br)  CU NIPDAU  Level-2-260C-1 YEAR TPA0172PWPRG4 TPA0172PWPRG4
TPA0172 应用技术支持与电子电路设计开发资源下载
  1. TPA0172 数据资料 dataSheet 下载.PDF
  2. TI 德州仪器扬声器放大器和调制器产品选型与价格 . xls