TPS75333-Q1 汽车类快速瞬态响应 1.5A 低压降稳压器
|
TPS75333-Q1 |
| Iout(Max)(A) |
1.5 |
| Vdo(Typ)(mV) |
160 |
| Iq(Typ)(mA) |
0.075 |
| Vin(Min)(V) |
3.46 |
| Vin(Max)(V) |
5 |
| Vout(Min)(V) |
3.3 |
| Vout(Max)(V) |
3.3 |
| Output Capacitor(uF) |
47 |
| Output Capacitor Type |
Tantalum |
| Fixed Output Options(V) |
3.3 |
| Pin/Package |
20HTSSOP |
| Rating |
Automotive |
| Regulated Outputs(#) |
1 |
TPS75333-Q1 描述
The TPS753xxQ and TPS751xxQ are low dropout regulators with integrated power-on reset and power-good (PG) functions respectively. These devices are capable of supplying 1.5 A of output current with a dropout of 160 mV (TPS75133Q, TPS75333Q). Quiescent current is 75 µA at full load and drops down to 1 µA when the device is disabled. TPS751xxQ and TPS753xxQ are designed to have fast transient response for larger load current changes.
Because the PMOS device behaves as a low-value resistor, the dropout voltage is very low (typically 160 mV at an output current of 1.5 A for the TPS75x33Q) and is directly proportional to the output current. Additionally, since the PMOS pass element is a voltage-driven device, the quiescent current is very low and independent of output loading (typically 75 µA over the full range of output current, 1 mA to 1
TPS75333-Q1 特性
- Qualified for Automotive Applications
- ESD Protection Exceeds 2000 V Per MIL-STD-883, Method 3015; Exceeds 200 V Using Machine Model (C = 200 pF, R = 0)
- 1.5-A Low-Dropout Voltage Regulator
- Available in 1.5-V, 1.8-V, 2.5-V, 3.3-V, Fixed Output and Adjustable Versions
- Open Drain Power-Good (PG) Status Output (TPS751xxQ)
- Open Drain Power-On Reset With 100-ms Delay (TPS753xxQ)
- Dropout Voltage Typically 160 mV at 1.5 A (TPS75133Q)
- Ultralow 75 µA Typical Quiescent Current
- Fast Transient Response
- 2% Tolerance Over Specified Conditions For Fixed-Output Versions
- 20-Pin TSSOP (PWP) PowerPAD™ Package
- Thermal Shutdown Protection
TPS75333-Q1 芯片订购指南
| 器件 |
状态 |
温度 (oC) |
价格（美元） |
封装 | 引脚 |
封装数量 | 封装载体 |
丝印标记 |
| TPS75333QPWPRQ1 |
ACTIVE |
-40 to 125 |
1.05 | 1ku |
HTSSOP (PWP) | 20 |
2000 |
75333Q1 |
TPS75333-Q1 质量与无铅数据
| 器件 |
环保计划* |
铅/焊球涂层 |
MSL 等级/回流焊峰 |
环保信息与无铅 (Pb-free) |
DPPM / MTBF / FIT 率 |
| TPS75333QPWPRQ1 |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-3-260C-168 HR |
TPS75333QPWPRQ1 |
TPS75333QPWPRQ1 |
TPS75333-Q1 应用技术支持与电子电路设计开发资源下载
- TPS75333-Q1 数据资料 dataSheet 下载.PDF
- TI 德州仪器LDO低压差线性稳压器驱动器选型与价格参考 . xls
- Dual MOSFET Driver
(PDF 498 KB)
- 全面认识开关型电源中的BUCK-BOOST功率级 (Rev. A)
(PDF 2206 KB)
- LDO PSRR Measurement Simplified
(PDF 140 KB)
- LDO Noise Demystified
(PDF 782 KB)
- 标准线性产品交叉参考 (Rev. D)
(PDF 1058 KB)
- 模数规格和性能特性术语表 (Rev. A) (PDF 1993 KB)
- 所选封装材料的热学和电学性质 (PDF 645 KB)
- 高速数据转换 (PDF 1967 KB)
