The AD676 is a multipurpose 16-bit parallel output analog-to-digital converter which utilizes a switched-capacitor/charge redistribution architecture to achieve a 100 kSPS conversion rate (10 µs total conversion time). Overall performance is optimized by digitally correcting internal nonlinearities through on-chip autocalibration.
The AD676 circuitry is segmented onto two monolithic chips- a digital control chip fabricated on Analog Devices DSP CMOS process and an analog ADC chip fabricated on our BiMOS II process. Both chips are contained in a single package.
The AD676 is specified for ac (or "dynamic") parameters such as S/(N+D) Ratio, THD and IMD which are important in signal processing applications. In addition, dc parameters are specified which are important in measurement applications.
The AD676 operates from +5 V and ±12 V supplies and typically consumes 360 mW during conversion. The digital supply (VDD ) is separated from the analog supplies (VCC , VEE ) for reduced digital crosstalk. An analog ground sense is provided for the analog input. Separate analog and digital grounds are also provided.
The AD676 is available in a 28-pin plastic DIP or 28-pin side-brazed ceramic package. A serial-output version, the AD677, is available in a 16-pin 300 mil wide ceramic or plastic package.
产品型号 | 产品状态 | 封装 | 引脚 | 温度范围 |
---|---|---|---|---|
5962-9474301MXA | Prodn | S/B OR B/B CERAMIC DIP | 28 | 商业 |
AD676-EB | Prodn | Evaluation Boards | - | 商业 |
AD676AD | Prodn | 28 ld Side-Brazed CerDIP | 28 | 工业 |
AD676BD | Prodn | 28 ld Side-Brazed CerDIP | 28 | 工业 |
AD676JD | Prodn | 28 ld Side-Brazed CerDIP | 28 | 商业 |
AD676JDZ | Prodn | 28 ld Side-Brazed CerDIP | 28 | 商业 |
AD676JN | Prodn | 28 ld PDIP | 28 | 商业 |
AD676KD | Prodn | 28 ld Side-Brazed CerDIP | 28 | 商业 |
AD676KN | Prodn | PLASTIC DIP | 28 | 商业 |