首页 > ADI 模拟器件公司 > 数据转换器 > 模数转换器ADC > 温度数字转换器DTS

AD7418ARMZ-REEL:  10-Bit Digital Temperature Sensor (AD7416) and Four Single-Channel ADCs

The AD7417 and AD7418 are 10-bit, 4-channel and single-channel ADCs with an on-chip temperature sensor that can operate from a single 2.7 V to 5.5 V power supply. The devices contain a 15 μs successive approximation converter, a 5-channel multiplexer, a temperature sensor, a clock oscillator, a track-and-hold, and a reference (2.5 V). The AD7416 is a temperature-monitoring only device in an 8-lead package.

The temperature sensor on the parts can be accessed via multip-lexer Channel 0. When Channel 0 is selected and a conversion is initiated, the resulting ADC code at the end of the conversion gives a measurement of the ambient temperature (±1°C @ 25°C). On-chip registers can be programmed with high and low tempera-ture limits, and an open-drain overtemperature indicator (OTI) output is provided, which becomes active when a programmed limit is exceeded.

A configuration register allows programming of the sense of the OTI output (active high or active low) and its operating mode (comparator or interrupt). A programmable fault queue counter allows the number of out-of-limit measurements that must occur before triggering the OTI output to be set to prevent spurious triggering of the OTI output in noisy environments.

An I²C® compatible serial interface allows the AD7416/AD7417/ AD7418 registers to be written to and read back. The three LSBs of the AD7416/AD7417 serial bus address can be selected, which allows up to eight AD7416/AD7417 devices to be connected to a single bus.

The AD7417 is available in a narrow body, 0.15 inch, 16-lead, small outline package (SOIC) and in a 16-lead, thin shrink, small outline package (TSSOP). The AD7416 and AD7418 are available in 8-lead SOIC and MSOP packages.

产品焦点 Product Highlights

1. The AD7416/AD7417/AD7418 have an on-chip temperature sensor that allows an accurate measurement of the ambient temperature (±1°C @ 25°C, ±2°C overtemperature) to be made. The measurable temperature range is −40°C to +125°C. An overtemperature indicator is implemented by carrying out a digital comparison of the ADC code for Channel 0 (temperature sensor) with the contents of the on-chip TOTI setpoint register.
2. The AD7417 offers a space-saving, 10-bit analog-to-digital solution with four external voltage input channels, an on-chip temperature sensor, an on-chip reference, and a clock oscillator.
3. The automatic power-down feature enables the AD7416/ AD7417/AD7418 to achieve superior power performance. At slower throughput rates, the part can be programmed to operate in a low power shutdown mode, allowing further savings in power consumption

产品应用领域 Applications

• Data acquisition with ambient temperature monitoring
• Industrial process control
• Automotive
• Battery-charging applications
• Personal computers

AD7418ARMZ-REEL 特点

• 10-bit ADC with 15 μs and 30 μs conversion times
• Single and 4 single-ended analog input channels
• On-chip temperature sensor:
  −40°C to +125°C
• On-chip track-and-hold
• Overtemperature indicator
• Automatic power-down at the end of a conversion
• Wide operating supply range: 2.7 V to 5.5 V
• I²C-compatible serial interface
• Selectable serial bus address allows connection of up to 8 AD7416/AD7417 devices to a single bus
• AD7416 is a superior replacement for LM75

AD7418ARMZ-REEL 功能框图

AD7418 芯片订购指南

产品型号	产品状态	封装	引脚	温度范围
AD7418ACHIPS	量产	CHIPS OR DIE	-	工业
AD7418ARM	量产	8 ld MSOP	8	工业
AD7418ARM-REEL7	量产	8 ld MSOP	8	工业
AD7418ARMZ	量产	8 ld MSOP	8	工业
AD7418ARMZ-REEL	量产	8 ld MSOP	8	工业
AD7418ARMZ-REEL7	量产	8 ld MSOP	8	工业
AD7418ARZ	量产	8 ld SOIC	8	商业
AD7418ARZ-REEL	量产	8 ld SOIC	8	商业
AD7418ARZ-REEL7	量产	8 ld SOIC	8	商业

AD7418ARMZ-REEL 应用技术支持与电子电路设计开发资源下载

1. AD7418 数据手册DataSheet下载 . pdf
2. Analog Devices, Inc.ADI 美国模拟器件公司产品订购手册 .pdf
3. ADC模数转换器选型指南 . pdf