首页 > ADI 模拟器件公司 > 数据转换器 > 模数转换器ADC > 模数转换器

AD80141BCPZ-140:  12位、80 MSPS/105 MSPS/125 MSPS、1.8 V模数转换器

The AD9233 is a monolithic, single 1.8 V supply, 12-bit, 80 MSPS/ 105 MSPS/125 MSPS analog-to-digital converter (ADC), featuring a high performance sample-and-hold amplifier (SHA) and on-chip voltage reference. The product uses a multistage differential pipeline architecture with output error correction logic to provide 12-bit accuracy at 125 MSPS data rates and guarantees no missing codes over the full operating temperature range.

The wide bandwidth, truly differential SHA allows a variety of user-selectable input ranges and offsets, including single-ended applications. It is suitable for multiplexed systems that switch full-scale voltage levels in successive channels and for sampling single-channel inputs at frequencies well beyond the Nyquist rate. Combined with power and cost savings over previously available ADCs, the AD9233 is suitable for applications in communications, imaging, and medical ultrasound.

A differential clock input controls all internal conversion cycles. A duty cycle stabilizer (DCS) compensates for wide variations in the clock duty cycle while maintaining excellent overall ADC performance.

The digital output data is presented in offset binary, Gray code, or twos complement formats. A data output clock (DCO) is provided to ensure proper latch timing with receiving logic.

The AD9233 is available in a 48-lead LFCSP and is specified over the industrial temperature range (−40°C to +85°C).

ol { margin-top:0px; margin-right:0px; margin-bottom:0px; margin-left:25px; padding-top:0px; padding-right:0px; padding-bottom:10px; padding-left:0px;} li { padding-top:0px; padding-right:0px; padding-bottom:5px; padding-left:0px; margin-top:0px; margin-right:0px; margin-bottom:0px; margin-left:0px;}

AD9233是一款单芯片、12位、80 MSPS/ 105 MSPS/125 MSPS模数转换器（ADC）,采用1.8 V单电源供电,内置一个高性能采样保持放大器（SHA）和片内基准电压源。该产品采用多级差分流水线架构,内置输出纠错逻辑,在125 MSPS数据速率时可提供12位精度,并保证在整个工作温度范围内无失码。

利用宽带宽、真差分采样保持放大器（SHA）,用户可以选择包括单端应用在内的各种输入范围和偏移。该器件适用于在连续通道中切换满量程电平的多路复用系统,以及采用远超过Nyquist速率的频率对单通道输入进行采样。与以前的模数转换器相比,AD9233的功耗与成本均有所降低,适用于通信、成像和医疗超声等应用。

采用一个差分时钟输入来控制所有内部转换周期。一个占空比稳定器（DCS）用来补偿较大的时钟占空比波动,同时保持出色的ADC总体性能。

数字输出数据格式为偏移二进制、格雷码或二进制补码。一个数字输出时钟（DCO）用来确保接收逻辑具有正确的锁存定时。

AD9233采用48引脚LFCSP封装,额定温度范围为−40°C至+85°C工业温度范围。

产品焦点 Product Highlights

1. The AD9233 operates from a single 1.8 V power supply and features a separate digital output driver supply to accommodate 1.8 V to 3.3 V logic families.
2. The patented SHA input maintains excellent performance for input frequencies up to 225 MHz.
3. The clock DCS maintains overall ADC performance over a wide range of clock pulse widths.
4. A standard serial port interface supports various product features and functions, such as data formatting (offset binary, twos complement, or Gray coding), enabling the clock DCS, power-down, and voltage reference mode.
5. The AD9233 is pin compatible with the AD9246, allowing a simple migration from 12 bits to 14 bits.
6. AD9233采用1.8 V单电源供电,而数字输出驱动器采用一个独立的电源供电,以适应1.8 V至3.3 V逻辑。
7. 取得专利的SHA输入在最高225 MHz的输入频率下仍保持出色的性能。
8. 时钟占空比稳定器（DCS）在较宽的时钟脉冲宽度范围内仍保持ADC的整体性能。
9. 标准串行端口接口支持各种产品特性和功能,例如：数据格式化（偏移二进制、二进制补码或格雷码）、启用时钟DCS、省电模式以及基准电压模式等。
10. AD9233与AD9246引脚兼容,使12位产品可轻松升级至14位产品。

产品应用领域 Applications

• Ultrasound equipment
• IF sampling in communications receivers
  - IS-95, CDMA-One, IMT-2000
• Battery-powered instruments
• Hand-held scopemeters
• Low cost digital oscilloscopes
• 超声设备
• 使用IF采样的通信接收机
  - IS-95、CDMA-One、IMT-2000
• 电池供电仪表
• 手持式示波表
• 低成本数字示波器

AD80141BCPZ-140 特点

• 1.8 V analog supply operation
• 1.8 V to 3.3 V output supply
• DNL = ±0.15 LSB
• SFDR = 85 dBc to 70 MHz input
• Low power: 395 mW @ 125 MSPS
• Differential input with 650 MHz bandwidth
• On-chip voltage reference and sample-and-hold amplifier
• 11-bit 140Msps device available (AD80141)

• Flexible analog input: 1 V p-p to 2 V p-p range
• Offset binary, Gray code, or twos complement data format
• Data output clock and clock duty cycle stabilizer
• Serial port control
  Built-in selectable digital test pattern generation
  Programmable clock and data alignment
• 1.8 V模拟电源供电
• 1.8 V至3.3 V输出电源
• 微分非线性（DNL）：±0.15 LSB
• 无寄生动态范围（SFDR）：85 dBc（至70 MHz输入）
• 低功耗：395 mW （125 MSPS）
• 差分输入、650 MHz带宽
• 片内基准电压源和采样保持放大器
• 提供11位140 MSPS器件（AD80141）

• 灵活的模拟输入范围：1 V p-p至2 V p-p
• 数据格式：偏移二进制、格雷码或二进制补码
• 数据输出时钟与时钟占空比稳定器
• 串行端口控制
  生成内置可选择数字测试码
  可编程时钟与数据对准

AD9233 芯片订购指南

产品型号	产品状态	封装	Pins	温度范围
AD80141BCPZ-140	量产	48 ld LFCSP (7x7mm w_4.1mm EP)	48	工业
AD9233-105EB	量产	评估板	48	待定
AD9233-105EBZ	量产	评估板	48	待定
AD9233-125EBZ	量产	评估板	48	待定
AD9233BCPZ-105	量产	48 ld LFCSP (7x7mm w_4.1mm EP)	48	工业
AD9233BCPZ-125	量产	48 ld LFCSP (7x7mm w_4.1mm EP)	48	工业
AD9233BCPZ-80	量产	48 ld LFCSP (7x7mm w_4.1mm EP)	48	待定
AD9233BCPZRL7-105	量产	48 ld LFCSP (7x7mm w_4.1mm EP)	48	工业
AD9233BCPZRL7-125	量产	48 ld LFCSP (7x7mm w_4.1mm EP)	48	工业

AD80141BCPZ-140 应用技术支持与电子电路设计开发资源下载

1. AD9233 数据手册DataSheet下载 . pdf
2. Analog Devices, Inc.ADI 美国模拟器件公司产品订购手册 .pdf
3. ADC模数转换器选型指南 . pdf