ADM1490E: 5 V, 16 Mbps, ESD Protected, Full-Duplex RS-485 Transceiver

adm1490e 功能框图The ADM1490E/ADM1491E are RS-485/RS-422 transceivers with ±8 kV ESD protection and are suitable for high speed, full-duplex communication on multipoint transmission lines. In particular, the ADM1490E/ADM1491E are designed for use in motor control applications requiring communications at data rates up to 16 Mbps.

The ADM1490E/ADM1491E are designed for balanced trans-mission lines and comply with TIA/EIA-485-A-98. The devices each have a 12 kΩ receiver input impedance for unit load RS-485 operation, allowing up to 32 nodes on the bus.The differential transmitter outputs and receiver inputs feature electrostatic discharge circuitry that provides protection to ±8 kV using the human body model (HBM).

The ADM1490E/ADM1491E operate from a single 5 V power supply. Excessive power dissipation caused by bus contention or output shorting is prevented by short-circuit protection and thermal circuitry. Short-circuit protection circuits limit the maximum output current to ±250 mA during fault conditions. A thermal shutdown circuit senses if the die temperature rises above 150°C and forces the driver outputs into a high impedance state under this condition.

The receiver of the ADM1490E/ADM1491E contains a fail-safe feature that results in a logic high output state if the inputs are unconnected (floating). The ADM1490E/ADM1491E feature extremely fast and closely matched switching times. Minimal driver propagation delays permit transmission at data rates up to 16 Mbps, and low skew minimizes EMI interference.The ADM1490E/ADM1491E are fully specified over the commercial and industrial temperature ranges. The ADM1490E is available in two packages: a narrow body, 8-lead SOIC and an 8-lead MSOP. The ADM1491E is also available in two packages: a narrow body, 14-lead SOIC and a 10-lead MSOP.

技术特性
  • RS-485/RS-422 full-duplex transceiver for high speed motor control applications
  • 16 Mbps data rate
  • ±8 kV ESD protection on RS-485 input/output pins
  • Complies with ANSI/TIA/EIA-485-A-1998
  • Open circuit fail-safe
  • Suitable for 5 V power supply applications
  • 32 nodes on the bus (1 unit load)
  • Thermal shutdown protection
  • Operating temperature range: −40°C to +85°C
  • ADM1490E packages
    Narrow body, 8-lead SOIC
    8-lead MSOP
  • ADM1491E packages
    Narrow-body, 14-lead SOIC
    10-lead MSOP
技术指标
  • Function: Driver,Receiver
  • Data Rate: 16Mbps
  • #Tx: 1
  • # Rx: 1
  • Pwr Supply (Vnom): +5
  • Input Compatibility: RS-485,TTL
  • Output Compatibility: RS-485
  • Protocols: RS-422,RS-485
应用领域
  • RS-485/RS-422 interfaces
  • Industrial field networks
  • High data rate motor control
  • Multipoint data transmission systems
  • Single-ended-to-differential signal conversion
订购指南
产品型号 封装 引脚 温度范围 包装和数量 报价*(100-499) 报价*1000 pcs RoHS
ADM1490EBRMZ 产品状态: 量产 8 ld MSOP 8 工业 Tube, 50 $ 1.41 $ 1.20 Y 材料信息
ADM1490EBRMZ-REEL7 产品状态: 量产 8 ld MSOP 8 工业 Reel, 1000 - $ 1.20 Y 材料信息
ADM1490EBRZ 产品状态: 量产 8 ld SOIC 8 工业 Tube, 98 $ 1.35 $ 1.15 Y 材料信息
ADM1490EBRZ-REEL7 产品状态: 量产 8 ld SOIC 8 工业 Reel, 1000 - $ 1.15 Y 材料信息
ADM1490E 应用技术支持与电子电路设计开发资源下载
  1. ADM1490E 数据手册DataSheet 下载 Rev D, 02/2012 (pdf 335kB). pdf
  2. ADI 模拟器件公司比较器产品选型指南 . pdf
  3. Analog Devices, Inc. 美国模拟器件公司产品订购手册 .pdf