ADuC7019BCPZ62I: Precision Analog Microcontroller, 12-Bit Analog I/O, ARM7TDMI® MCU
The ADuC7019/ADuC7020/ADuC7021/ADuC7022/ADuC7024/ADuC7025/ADuC7026/ADuC7027/ADuC7028 are fully integrated, 1 MSPS, 12-bit data acquisition systems incorporating high performance multichannel ADCs, 16-bit/32-bit MCUs, and Flash/EE memory on a single chip.
The ADC consists of up to 12 single-ended inputs. An additional four inputs are available but are multiplexed with the four DAC output pins. The four DAC outputs are only available on certain models (ADuC7020 and ADuC7026). However, in many cases where the DAC outputs are not present, these pins can still be used as additional ADC inputs, giving a maximum of 16 ADC input channels. The ADC can operate in single-ended or differential input modes. The ADC input voltage is 0 V to VREF. A low drift band gap reference, temperature sensor, and voltage comparator complete the ADC peripheral set.
Depending on the part model, up to four buffered voltage output DACs are available on-chip. The DAC output range is programmable to one of three voltage ranges.
The devices operate from an on-chip oscillator and a PLL generating an internal high frequency clock of 41.78 MHz. This clock is routed through a programmable clock divider from which the MCU core clock operating frequency is generated. The microcontroller core is an ARM7TDMI, 16-bit/32-bit RISC machine, which offers up to 41 MIPS peak performance. Eight kilobytes of SRAM and 62 kilobytes of nonvolatile Flash/EE memory are provided on-chip. The ARM7TDMI core views all memory and registers as a single linear array.
产品应用领域 Applications
- Industrial control and automation systems
- Smart sensors, precision instrumentation
- Base station systems, optical networking
ADuC7019BCPZ62I 特点
- Microcontroller
ARM7TDMI core, 16-bit/32-bit RISC architecture
JTAG port supports code download and debug - Clocking options
Trimmed on-chip oscillator (±3%)
External watch crystal
External clock source up to 44 MHz
41.78 MHz PLL with programmable divider - Memory
62 kB flash/EE memory, 8 kB SRAM
In-circuit download, JTAG-based debug
Software-triggered in-circuit reprogrammability
- Multichannel, 12-bit, 1 MSPS ADC
Up to 16 ADC channels1 - Fully differential and single-ended modes
- 0 V to VREF analog input range
- 12-bit voltage output DACs
Up to 4 DAC outputs available1 - On-chip voltage reference
- On-chip temperature sensor (±3°C)
- Voltage comparator
- Power
Specified for 3 V operation
Active mode: 11 mA @ 5 MHz, 40 mA @ 41.78 MHz - Packages and temperature range
From 40-lead 6 mm x 6 mm LFCSP to 80-lead LQFP1
Fully specified for –40°C to +125°C operation - Tools
Low cost QuickStart™ development system
Full third-party support
- UART, 2 x I²C® and SPI® serial I/O
- Up to 40-pin GPIO port1
- 4x general-purpose timers
- Wake-up and watchdog timers (WDT)
- Power supply monitor
- 3-phase, 16-bit PWM generator1
- Programmable logic array (PLA)
- External memory interface, up to 512 kB1
ADuC7019BCPZ62I 功能框图
| 产品型号 | 产品状态 | 封装 | 引脚 | 温度范围 |
|---|---|---|---|---|
| ADuC7019BCPZ62I | 量产 | 40 ld LFCSP (6x6mm w.4.1mm pad) | 40 | 工业 |
| ADuC7019BCPZ62IRL7 | 量产 | 40 ld LFCSP (6x6mm w.4.1mm pad) | 40 | 工业 |
