| Flash (Kbytes) | 32 |
| ISP | UART |
| Self Program Memor | API |
| EEPROM (Kbytes) | 2 |
| RAM (Bytes) | 1280 |
| F.max (MHz) | 40 |
| Vcc (V) | 3-5.5 |
| I/O Pins | 34 |
| UART | 1 |
| 16-bit Timers | 3 |
| Watchdog | Yes |
| Packages | LQFP 44 PLCC 44 |
| Pb-Free Packages | LQFP 44 PLCC 44 |
8-bit microcontroller with 32Kbyte Flash, 2KByte EEPROM and 10-bit A/D converter
We recommend to implement an external brown out to prevent any Flash/EEPROM corruption during power-on or power-off. Please refer to related application note: External Brown-out Protection for C51 Microcontrollers with Active High Reset Input.
The A/T89C51AC2 is a high performance Flash version of the 80C51 single chip 8-bit
microcontrollers. It contains a 32 KB Flash memory block for program and data.
The 32 KB Flash memory can be programmed either in parallel mode or in serial
mode with the ISP capability or with software. The programming voltage is internally
generated from the standard VCC pin.
The A/T89C51AC2 retains all features of the 80C51 with 256 bytes of internal RAM, a
7-source 4-level interrupt controller and three timer/counters. In addition, the
A/T89C51AC2 has a 10-bit A/D converter, a 2 KB Boot Flash memory, 2 KB EEPROM
for data, a Programmable Counter Array, an XRAM of 1024 bytes, a Hardware Watch-
Dog Timer, and a more versatile serial channel that facilitates multiprocessor
communication (EUART). The fully static design of the A/T89C51AC2 reduces system
power consumption by bringing the clock frequency down to any value, even DC,without loss of data.
The A/T89C51AC2 has two software-selectable modes of reduced activity and an 8-bit clock prescaler for further reduction in power consumption. In the idle mode the
CPU is frozen while the peripherals and the interrupt system are still operating. In the
Power-down mode the RAM is saved and all other functions are inoperative.
The added features of the A/T89C51AC2 make it more powerful for applications that
need A/D conversion, pulse width modulation, high speed I/O and counting capabilities
such as industrial control, consumer goods, alarms, motor control, among others.
While remaining fully compatible with the 80C52, the T8C51AC2 offers a superset of
this standard microcontroller. In X2 mode, a maximum external clock rate of 20 MHz
reaches a 300 ns cycle time.
| Part-Number | Supply Voltage |
Temperature Range |
Max Frequency |
Package | Packing |
| AT89C51AC2-RLTUM | 3V to 5.5V + 10% | Industrial Green | 40 MHz | VQFP44 | Tray |
| AT89C51AC2-SLSUM | PLCC44 | Stick |
