The LTC®2923 provides a simple solution to power supply tracking and sequencing requirements. By selecting a few resistors, the supplies can be configured to ramp-up and ramp-down together or with voltage offsets, time delays or different ramp rates.
By introducing currents into the feedback nodes of two independent switching regulators, the LTC2923 causes their outputs to track without inserting any pass element losses. Because the currents are controlled in an openloop manner, the LTC2923 does not affect the transient response or stability of the supplies. Furthermore, it presents a high impedance when power-up is complete, effectively removing it from the DC/DC circuit.
For systems that require a third supply, one supply can be controlled with a series FET. This optional series FET can also control a supply that does not allow direct access to its feedback resistors (e.g., a power module) or a supply whose output cannot be forced to ground (e.g., a 3-terminal linear regulator). When the FET is used, an electronic circuit breaker provides protection from short-circuit conditions
产品特点 Features
参数 |
应用
典型应用图 |
器件型号 | 封装 | 引脚 | 温度 | 价格 (以 1 ~ 99 片为批量) | 价格 (以 1000 片为批量) * |
LTC2923CDE | DFN | 12 | C | $3.60 | $3.15 |
LTC2923CDE#PBF | DFN | 12 | C | $3.60 | $3.15 |
LTC2923CDE#TR | DFN | 12 | C | $3.21 | |
LTC2923CDE#TRPBF | DFN | 12 | C | $3.21 | |
LTC2923CMS | MSOP | 10 | C | $3.90 | $2.95 |
LTC2923CMS#PBF | MSOP | 10 | C | $3.90 | $2.95 |
LTC2923CMS#TR | MSOP | 10 | C | $3.01 | |
LTC2923CMS#TRPBF | MSOP | 10 | C | $3.01 | |
LTC2923IDE | DFN | 12 | I | $4.15 | $3.60 |
LTC2923IDE#PBF | DFN | 12 | I | $4.15 | $3.60 |
LTC2923IDE#TR | DFN | 12 | I | $3.66 | |
LTC2923IDE#TRPBF | DFN | 12 | I | $3.66 | |
LTC2923IMS | MSOP | 10 | I | $4.50 | $3.40 |
LTC2923IMS#PBF | MSOP | 10 | I | $4.50 | $3.40 |
LTC2923IMS#TR | MSOP | 10 | I | $3.46 | |
LTC2923IMS#TRPBF | MSOP | 10 | I | $3.46 |