NCP349GEVB:POSITIVE OVP EVB

The NCP349 is able to disconnect the systems from its output pin when wrong input operating conditions are detected. The system is positive overvoltage protected up to +28 V. This device uses an internal NMOS and therefore, no external device is necessary, reducing the system cost and the PCB area of the application board. The NCP349 is able to instantaneously disconnect the output from the input, due to integrated Low RON Power NMOS (65 mΩ), if the input voltage exceeds the overvoltage threshold (OVLO) or falls below the undervoltage threshold (UVLO). The NCP349 provides a negative going flag (FLAG) output, which alerts the system that a fault has occurred. In addition, the device has ESD-protected input (15 kV Air) when bypassed with a 1.0 µF or larger capacitor.

技术特性
  • Overvoltage Protection up to 28 V
  • On-Chip Low RDS(on) NMOS Transistor: 80 m
  • Overvoltage Lockout (OVLO)
  • Undervoltage Lockout (UVLO)
  • Alert FLAG(BAR) Output
  • Shutdown EN(BAR) Input
  • This is a Pb-Free Device
NCP349GEVB 实物图

NCP349GEVB 实物图

评估板信息
评估板 状况 无铅(Pb-free) 简短说明 所用产品
NCP349GEVB Active Pb-free POSITIVE OVP EVB NCP349MNAETBG
技术文档
类型 文档标题 文档编号 修订号
Eval Board: BOM NCP349GEVB Bill of Materials ROHS Compliant NCP349GEVB_BOM_ROHS.PDF 0
Eval Board: Gerber NCP349GEVB Gerber Layout Files (Zip Format) NCP349GEVB_GERBER.ZIP 0
Eval Board: Schematic NCP349GEVB Schematic NCP349GEVB_SCHEMATIC.PDF 0
Eval Board: Test Procedure NCP349GEVB Test Procedure NCP349GEVB_TEST_PROCEDURE.PDF 0
Eval Board: Manual NCP349GEVB Manual NCP349GEVB_MANUAL.PDF - 101.0 KB 0