NCP5106:Dual Input High Voltage High and Low Side MOSFET or IGBT Drivers (600V)
The NCP5106 is a High Voltage gate Driver IC providing two outputs for direct drive of 2 N-channel power MOSFETs or IGBTs arranged in a half-bridge configuration version B or any other high-side + low-side configuration version A. It uses the bootstrap technique to insure a proper drive of the High-side power switch. The driver works with 2 independent inputs. NCP5109 = 200V NCP5106 = 600V
技术特性
- High Voltage Range: Up to 600 V
- dV/dt Immunity ± 50 V/nsec
- Gate Drive Supply Range from 10 V to 20 V
- High and Low Drive Outputs
- Output Source / Sink Current Capability 250 mA / 500 mA
- 3.3 V and 5 V Input Logic Compatible
- Up to Vcc Swing on Input Pins
- Matched Propagation Delays Between Both Channels
- Outputs in Phase with the Inputs
- Independent Logic Inputs to Accommodate All Topologies (Version A)
- Cross Conduction Protection with 100 ns Internal Fixed Dead Time (Version B )
- Under Vcc LockOut (UVLO) for Both Channels
- Pin-to-Pin Compatible with Industry Standards
|
应用
- Half-Bridge Power Converters
- Any Complementary Drive Converters (Asymmetrical Half-Bridge, Active Clamp) (A version only).
- Full-Bridge Converters
封装图 PACKAGE DIMENSIONS
|
订购信息 Ordering Information
| 产品 |
状况 |
Compliance |
具体说明 |
封装 |
MSL* |
容器 |
预算价格 (1千个数量的单价） |
| 类型 |
外形 |
类型 |
数量 |
| NCP5106ADR2G |
Active |
|
Dual Input High Voltage High and Low Side MOSFET or IGBT Drivers (600V) |
SOIC-8 |
751-07 |
1 |
Tape and Reel |
2500 |
$0.32 |
| NCP5106APG |
Active |
|
Dual Input High Voltage High and Low Side MOSFET or IGBT Drivers (600V) |
PDIP-8 |
626-05 |
1 |
Tube |
50 |
$0.768 |
| NCP5106BDR2G |
Active |
|
Dual Input High Voltage High and Low Side MOSFET or IGBT Drivers (600V) |
SOIC-8 |
751-07 |
1 |
Tape and Reel |
2500 |
$0.32 |
| NCP5106BPG |
Active |
|
Dual Input High Voltage High and Low Side MOSFET or IGBT Drivers (600V) |
PDIP-8 |
626-05 |
1 |
Tube |
50 |
$0.768 |
数据资料DataSheet下载
