NLSX0102:2-Bit 20 Mb/s Dual-Supply Level Translator

The NLSX0102 is a 2-bit configurable dual-supply bidirectional auto sensing translator that does not require a directional control pin. The IO VCC and IO VL ports are designed to track two different power supply rails, VCC and VL respectively. Both the VCC and VL supply rails are configurable from 1.5V to 5.5V. This allows voltage logic signals on the VL side to be translated into lower, higher or equal value voltage loigc signals on the VCC side, and vice-versa. The NLSX0102 translator has integrated 10k ohms pull-up resistors on the IO lines. The integrated resistors are used to pull-up the IO lines to either VL or VCC. The NLSX0102 is an excellent match for open-drain applications such as the I2C communication bus.

特性

VL can be Less than, Greater than or Equal to VCC
Wide VCC Operating Range: 1.5 V to 5.5 V
Wide VL Operating Range: 1.5 V to 5.5 V
High Speed with 24 Mb/s Guaranteed Date Rate
Low Bit to Bit Skew
Enable Input and I/O Pins are Overvoltage Tolerant (OVT) to 5.5 V
Non preferential Power up Sequencing
Integrated 10 k ohm Pull up Resistors
Small Space Saving Package:1.9 mm x 0.9 mm x 0.5 mm Flipchip8
This is a Pb Free Device
Low Voltage ASIC Level Translation
ESD Protection for All Pins: Human Body Model (HBM) > 7000 V

应用

I2C, SMBus

封装图 MARKING DIAGRAM

订购信息 Ordering Information

产品

状况

Compliance

具体说明

封装

MSL*

容器

预算价格 (1千个数量的单价）

类型

外形

类型

数量

NLSX0102FCT1G

Active

Pb-free

Halide free

2-Bit 20 Mb/s Dual-Supply Level Translator, NLSX0102

Flip-Chip-8

499BF

Die Surf Tape and Reel

3000

$0.3173

NLSX0102FCT2G