NLSX3013:8-Bit 100 Mbps Configurable Dual-Supply Level Translator
The NLSX3013 is a 8-bit configurable dual-supply bidirectional level translator without a direction control pin. The I/O VCC and I/O VL ports are designed to track two different power supply rails, VCC and VL respectively. The VCC supply rail is configurable from 1.3 V to 4.5 V while the VL supply rail is configurable from 0.9 V to (VCC minus 0.4)V. This allows lower voltage logic signals on the VL side to be translated into higher voltage logic signals on the VCC side, and vice versa. Both I/O ports are auto sensing; thus, no direction pin is required. The Output Enable (EN) input, when Low, disables both I/O ports by putting them in 3-state. This significantly reduces the supply currents from both VCC and VL. The EN signal is designed to track VL.
特性
- Wide Voltage Operating Range
- High-Speed with 100 Mb/s Guaranteed Date Rate for VL > 1.8V
- Low Bit-to-Bit Skew
- Overvoltage Tolerant Enable and I/O Pins
- Non-preferential Powerup Sequencing
- Small packaging: 2.03 mm x 2.54 mm 20 Pin Flip-Chip
- This is a Pb-Free Device
应用
- Handheld Battery powered devices operating at differing voltages
|
封装图 MARKING DIAGRAM
|
订购信息 Ordering Information
产品 |
状况 |
Compliance |
具体说明 |
封装 |
MSL* |
容器 |
预算价格 (1千个数量的单价) |
类型 |
外形 |
类型 |
数量 |
NLSX3013BFCT1G |
Active |
|
8-Bit 100 Mbps Configurable Dual-Supply Level Translator, 8-Bit 100 Mbps Configurable Dual-Supply Level Translator |
Flip-Chip-20 |
766AK |
1 |
Die Surf Tape and Reel |
3000 |
$2.1333 |
NLSX3013FCT1G |
Active |
|
8-Bit 100 Mbps Configurable Dual-Supply Level Translator, 8-Bit 100 Mbps Configurable Dual-Supply Level Translator |
Flip-Chip-20 |
766AK |
1 |
Die Surf Tape and Reel |
3000 |
$2.1333 |
数据资料DataSheet下载