NLSX4373:2-Bit 20 Mb/s Dual-Supply Level Translator
The NLSX4373 is a 2-Bit configurable dual-supply bidirectional auto sensing translator that does not require a directional control pin. The VCC I/O and VL I/O ports are designed to track two different power supply rails, VCC and VL respectively. The VCC supply rail is configurable from 1.5V to 5.5V while VL supply rail is configurable from 1.5V to 5.5V. This allows voltage logic signals on the VL side to be translated into lower, higher or equal value voltage logic signals on the VCC side and vice-versa. The NLSX4373 translator has open-drain outputs with integrated 10K Ohm pullup resistors on the I/O lines. The integrated pullup resistors are used to pullup the I/O lines to either VL or VCC. The NLSX4373 is an excellent match for open-drain applications such as the I2C communication bus.
特性
- Wide VCC Operating Range: 1.5V to 5.5V
Wide VL Operating Range: 1.5V to 5.5V
- High-Speed with 20 Mb/s Guaranteed Data Rates
- Low BIt-to-bit skew
- Small Packaging - 1.8 x 1.2 x 0.5mm UDFN8
应用
- I2C, SMBus, PMBus
- Low Voltage ASIC Level Translation
|
封装图 MARKING DIAGRAM
|
订购信息 Ordering Information
| 产品 |
状况 |
Compliance |
具体说明 |
封装 |
MSL* |
容器 |
预算价格 (1千个数量的单价） |
| 类型 |
外形 |
类型 |
数量 |
| NLSX4373DMR2G |
Active |
|
2-Bit 20 Mb/s Dual-Supply Level Translator |
Micro8™-8 |
846A-02 |
1 |
Tape and Reel |
4000 |
$0.5333 |
| NLSX4373DR2G |
Active |
|
2-Bit 20 Mb/s Dual-Supply Level Translator |
SOIC-8 |
751-07 |
1 |
Tape and Reel |
2500 |
$0.32 |
| NLSX4373MUTAG |
Active |
| AEC Qualified |
| Pb-free |
| Halide free |
|
2-Bit 20 Mb/s Dual-Supply Level Translator |
UDFN-8 |
517AJ |
1 |
Tape and Reel |
3000 |
$0.5333 |
数据资料DataSheet下载
