SKY77606 Multiband/Multimode PAM for Quad-Band GSM / EDGE and Tri-Band (Bands I, V, VIII)
SKYWORKS SKY77606 is a hybrid multimode, multiband Power Amplifier Module (PAM) that supports 2.5G and 3G handsets, and operates efficiently in GSM, EGPRS, EDGE and WCDMA modes. The PAM consists of a GSM800/EGSM900 PA block, a DCS1800/PCS1900 PA block, separate blocks for WCDMA operating in low / high bands, a logic control block for multiple power control levels, and band enable functions in both cellular and UMTS. RF I/O ports internally matched to 50 Ω minimize the number of external components. Extremely low leakage current maximizes handset standby time. GSM/EDGE: The SKY77606 uses a new compact architecture to support GSM850, EGSM900, DCS1800 and PCS1900 bands. The PAM also supports 2.5G Class 12 Enhanced General Packet Radio Service (EGPRS) multi-slot operation and EDGE linear modulation. WCDMA: The SKY77606 uses Switched Load Insensitive Power Amplifier (SLIPA) circuitry to support WCDMA, High-Speed Downlink Packet Access (HSDPA), and High-Speed Uplink Packet Access (HSUPA) modulations at moderate antenna Voltage Standing Wave Ratio (VSWR). This functionality covers multiple bands for 3GPP, including bands I, VIII, and operates at different power modes. The module is fully controllable via three line logic and bandenable interfaces. The InGaP/GaAs die and passive components are mounted on a multi-layer laminate substrate and the assembly encapsulated with plastic overmold. The SKY77606 is a compact, low profile, Surface Mount Technology (SMT) package, which allows for a highly manufacturable, low cost solution.
技术特性
- Hybrid architecture: separate GSM and WCDMA paths
- Separate single-ended GSM and WCDMA inputs/outputs, all ACcoupled
- Multiplexed voltage detector for all modes/bands provided to
transceiver
- Fully programmable serial bus interface
- Final VCC stage for 2.5G/3G can be attached to battery or buck
DC/DC
- Driver stage for 3G can be attached to battery or buck DC/DC
- 2.5G features:
- EGPRS Class 12 multi-slot operation
- Log power detector
- Linear PA with bias optimization for efficiency/linearity tradeoff
in 8-PSK mode
- 3G features:
- WCDMA mode supports output power and bandwidth for
bands I, II, V, and VIII
- Linear detector
- Linear balanced with bias optimization and low/high mode
gain switch for best efficiency/linearity trade-off
|
应用领域 APPLICATION
- Quad-band cellular handsets:
- Class 4 GSM850/EGSM900
- Class 1 DCS1800/PCS1900
- Class E2 GSM850/EGSM900
- Class 12 multi-slot EGPRS
- Multi-band 3G handsets
- WCDMA/HSDPA/HSUPA-modulated handsets for bands I, II, V, and VIII
- LTE modulated 4G handsets
订购信息 Ordering Information
功能框图 Functional Block Diagram
|